KMT 20, SKF, Precision Lock nut
Nut, Steel, M 100x2, EAN code: 7316577655080
MB 10, Neutral, Locking washer
Tab Washer, Steel
MS 3052-48, SKF, Locking clip
Securing plate, Steel, EAN code: 7316577058348
ZW 80X90, SKF, Spacing washer
Washer, Steel, EAN code: 7316571385631
KM 10, Neutral, Locknut
Nut, Steel, M 50x1.5
This item is not currently available from our stocks.
Despatch date information is on request.
KMK 18, SKF, Lock nut with integral locking screw
Nut, Steel, M 90x2, EAN code: 7316571022550
KMT 30, SKF, Precision Lock nut
Nut, Steel, M 150x2, EAN code: 7316577655134
HM 3072, NKE, Lock nut with locking clip and screw
Locknut, Steel, Tr 360x5, EAN code: 9008745224355
This item is not currently available from our stocks.
Despatch date information is on request.
TAN22, Timken, Lock nut
Nut, Steel, EAN code: 0053893001494
This item is not currently available from our stocks.
Despatch date information is on request.
TW118, Timken, Locking washer
Washer, Steel, EAN code: 0053893822105
This item is not currently available from our stocks.
Despatch date information is on request.
TW124, Timken, Locking washer
Washer, Steel, EAN code: 0053893815794
This item is not currently available from our stocks.
Despatch date information is on request.
AN 30, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660504
KM 14, Neutral, Locknut
Nut, Steel, M 70x2
KM 20, Neutral, Locknut
Nut, Steel, M 100x2
KMK 8, SKF, Lock nut with integral locking screw
Nut, Steel, M 40x1.5, EAN code: 7316570172515
KMT 10, SKF, Precision Lock nut
Nut, Steel, M 50x1.5, EAN code: 7316577314062
MB 18, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011619
MB 18, Neutral, Locking washer
Tab Washer, Steel
N 13, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571385488
KMFE 11, SKF, Lock nut with integral locking screw
Nut, Steel, M55x2, EAN code: 7316571585192
This item is not currently available from our stocks.
Despatch date information is on request.
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.