KM 17, Neutral, Locknut
Nut, Steel, M 85x2
KM 19, Neutral, Locknut
Nut, Steel, M 95x2
KM 22, Neutral, Locknut
Nut, Steel, M 110x2
KM 27, Neutral, Locknut
Nut, Steel, M 135x2
KM 34, Neutral, Locknut
Nut, Steel, M 170x3
KM 6 Nyloc, Neutral, Locknut
Nut, Steel, M 30x1.5
N 05, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571278735
MB 19, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011626
MB 5, Timken, Locking washer
Tab Washer, Steel, EAN code: 0087796028357
ZW 90X110, SKF, Spacing washer
Washer, Steel
HM 48 T, SKF, T lock/dismounting nut
Nut, Steel, Tr 240x4, EAN code: 7316577010643
KM 15, FAG, Locknut
Nut, Steel, M75x2, EAN code: 4012801052528
This item is not currently available from our stocks.
Despatch date information is on request.
KM 18, FAG, Locknut
Nut, Steel, M90x2, EAN code: 4012801052597
This item is not currently available from our stocks.
Despatch date information is on request.
KM 29, Neutral, Locknut
Nut, Steel, M 145x2
This item is not currently available from our stocks.
Despatch date information is on request.
KM 36, SKF, Locknut
Nut, Steel, M 180x3, EAN code: 7316577011336
KMFE 12, SKF, Lock nut with integral locking screw
Nut, Steel, M60x2, EAN code: 7316571585307
This item is not currently available from our stocks.
Despatch date information is on request.
KMK 19, SKF, Lock nut with integral locking screw
Nut, Steel, M 95x2, EAN code: 7316571179285
KML 24, SKF, Locknut
Nut, Steel, M 120x2, EAN code: 7316570314472
This item is not currently available from our stocks.
Despatch date information is on request.
KML 28, SKF, Locknut
Nut, Steel, M 140x2, EAN code: 7316571048918
This item is not currently available from our stocks.
Despatch date information is on request.
MB 36, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011763
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.