KMK 19, SKF, Lock nut with integral locking screw
Nut, Steel, M 95x2, EAN code: 7316571179285
KML 24, SKF, Locknut
Nut, Steel, M 120x2, EAN code: 7316570314472
This item is not currently available from our stocks.
Despatch date information is on request.
TW116, Timken, Locking washer
Washer, Steel, EAN code: 0053893816753
TW124, Timken, Locking washer
Washer, Steel, EAN code: 0053893815794
This item is not currently available from our stocks.
Despatch date information is on request.
TAN19, Timken, Lock nut
Nut, Steel, EAN code: 0053893001371
This item is not currently available from our stocks.
Despatch date information is on request.
ZM25, INA, Precision locknut
Precision locknut, Steel, M25X1, 5, EAN code: 4012802079333
This item is not currently available from our stocks.
Despatch date information is on request.
MB 2, Neutral, Locking washer
Tab Washer, Steel
MB 4, Neutral, Locking washer
Tab Washer, Steel
KM 4, Neutral, Locknut
Nut, Steel, M 20x1
KM 40, Neutral, Locknut
Nut, Steel, M 200x3
KMT 34, SKF, Precision Lock nut
Nut, Steel, M 170x3, EAN code: 7316577655158
KM 40, SKF, Locknut
Nut, Steel, M 200x3, EAN code: 7316577011350
TAN24, Timken, Lock nut
Nut, Steel, EAN code: 0053893001531
MB 30, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011725
MB 40, Neutral, Locking washer
Tab Washer, Steel
MS 3052-48, SKF, Locking clip
Securing plate, Steel, EAN code: 7316577058348
KMT 15, SKF, Precision Lock nut
Nut, Steel, M 75x2, EAN code: 7316577655042
KMT 26, SKF, Precision Lock nut
Nut, Steel, M 130x2, EAN code: 7316577655110
KMT 36, SKF, Precision Lock nut
Nut, Steel, M 180x3, EAN code: 7316577655165
KM 13 Nyloc, Neutral, Locknut
Nut, Steel, M 65x2
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.