KMK 12, SKF, Lock nut with integral locking screw
Nut, Steel, M 60x2, EAN code: 7316570379334
MB 1, Neutral, Locking washer
Tab Washer, Steel
MB 29, Neutral, Locking washer
Tab Washer, Steel
MB 5, Neutral, Locking washer
Tab Washer, Steel
MB 9, Neutral, Locking washer
Tab Washer, Steel
Z 210, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316577300782
KMT 32, SKF, Precision Lock nut
Nut, Steel, M 160x3, EAN code: 7316577655141
KM 14, Timken, Locknut
Nut, Steel, M 70x2, EAN code: 0013992173089
KMFE 15, SKF, Lock nut with integral locking screw
Nut, Steel, M75x2, EAN code: 7316571585352
This item is not currently available from our stocks.
Despatch date information is on request.
KMFE 16, SKF, Lock nut with integral locking screw
Nut, Steel, M80x2, EAN code: 7316571585574
This item is not currently available from our stocks.
Despatch date information is on request.
MS 3060, SKF, Locking clip
Securing plate, Steel, EAN code: 7316577011848
MB 22, FAG, Locking washer
Tab Washer, Steel, EAN code: 4054369880342
This item is not currently available from our stocks.
Despatch date information is on request.
TW140, Timken, Locking washer
Washer, Steel, EAN code: 0053893821344
ZW 42X52, SKF, Spacing washer
Washer, Steel, EAN code: 7316571351087
This item is not currently available from our stocks.
Despatch date information is on request.
AN 28, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660498
KMT 3, SKF, Precision Lock nut
Nut, Steel, M 17x1, EAN code: 7316577662729
KMT 6, NKE, Precision Lock nut
Nut, Steel, M 30x1.5, EAN code: 9008745233715
KM 0, Neutral, Locknut
Nut, Steel, M 10x0.75
KM 23, SKF, Locknut
Nut, Steel, M 115x2, EAN code: 7316577011213
KM 30, Neutral, Locknut
Nut, Steel, M 150x2
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.