HM 48 T, SKF, T lock/dismounting nut
Nut, Steel, Tr 240x4, EAN code: 7316577010643
KM 27, SKF, Locknut
Nut, Steel, M 135x2, EAN code: 7316577011251
KMK 20, SKF, Lock nut with integral locking screw
Nut, Steel, M 100x2, EAN code: 7316570447637
MB 23, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011664
W 22, SKF, Locking washer
Washer, Steel, EAN code: 7316576676178
TAN140, Timken, Lock nut
Nut, Steel, EAN code: 0053893004563
Z 006, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316571326160
This item is not currently available from our stocks.
Despatch date information is on request.
KM 2 Nyloc, Neutral, Locknut
Nut, Steel, M 15x1
KM 28, Neutral, Locknut
Nut, Steel, M 140x2
KM 30, Neutral, Locknut
Nut, Steel, M 150x2
KM 32, SKF, Locknut
Nut, Steel, M 160x3, EAN code: 7316577011305
KMK 12, SKF, Lock nut with integral locking screw
Nut, Steel, M 60x2, EAN code: 7316570379334
KMK 16, SKF, Lock nut with integral locking screw
Nut, Steel, M 80x2, EAN code: 7316570831580
KMT 14, Neutral, Precision Lock nut
Nut, Steel, M 70x2
KMT 15, SKF, Precision Lock nut
Nut, Steel, M 75x2, EAN code: 7316577655042
KMT 6, NKE, Precision Lock nut
Nut, Steel, M 30x1.5, EAN code: 9008745233715
MB 34, Neutral, Locking washer
Tab Washer, Steel
MB 38, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011770
MB 7, Neutral, Locking washer
Tab Washer, Steel
W 28, SKF, Locking washer
Washer, Steel, EAN code: 7316576676208
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.