KM 7 Nyloc, Neutral, Locknut
Nut, Steel, M 35x1.5
W 15, SKF, Locking washer
Washer, Steel, EAN code: 7316571385655
KM 12, Neutral, Locknut
Nut, Steel, M 60x2
MB 3, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316570545975
KM 20, SKF, Locknut
Nut, Steel, M 100x2, EAN code: 7316577011183
AN 30, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660504
MB 24, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571498904
KM 14, SKF, Locknut
Nut, Steel, M 70x2, EAN code: 7316571770277
KM 3, SKF, Locknut
Nut, Steel, M 17x1, EAN code: 7316571249797
KM 5, Neutral, Locknut
Nut, Steel, M 25x1.5
MB 12, Neutral, Locking washer
Tab Washer, Steel
KM 24, SKF, Locknut
Nut, Steel, M 120x2, EAN code: 7316577011220
KM 4 Nyloc, Neutral, Locknut
Nut, Steel, M 20x1
KM 9, Neutral, Locknut
Nut, Steel, M 45x1.5
N 09, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571385501
KM 30, SKF, Locknut
Nut, Steel, M 150x2, EAN code: 7316577011282
KMK 4, SKF, Lock nut with integral locking screw
Nut, Steel, M 20x1, EAN code: 7316571483542
KMT 6, SKF, Precision Lock nut
Nut, Steel, M 30x1.5, EAN code: 7316577291851
This item is not currently available from our stocks.
Despatch date information is on request.
MB 15, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571770260
MB 20, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011633
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.