KM 0, Neutral, Locknut
Nut, Steel, M 10x0.75
KM 23, Neutral, Locknut
Nut, Steel, M 115x2
KM 36, Neutral, Locknut
Nut, Steel, M 180x3
KM 4 Nyloc, Neutral, Locknut
Nut, Steel, M 20x1
KMK 1, SKF, Lock nut with integral locking screw
Nut, Steel, M 12x1, EAN code: 7316571483511
KMK 17, SKF, Lock nut with integral locking screw
Nut, Steel, M 85x2, EAN code: 7316570228083
KMK 7, SKF, Lock nut with integral locking screw
Nut, Steel, M 35x1.5, EAN code: 7316570620351
W 05, SKF, Locking washer
Washer, Steel, EAN code: 7316571385518
Z 005, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316571318714
Z 206, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316571501260
Z 308, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316571351254
AW 03, NSK, Locking washer
Washer, Steel, EAN code: 00029176527623
This item is not currently available from our stocks.
Despatch date information is on request.
This item is not currently available from our stocks.
Despatch date information is on request.
This item is not currently available from our stocks.
Despatch date information is on request.
MB 27, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011695
MB 34, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011756
MB 52, FAG, Locking washer
Tab Washer, Steel, EAN code: 4012801224642
This item is not currently available from our stocks.
Despatch date information is on request.
MB 9 A, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571155333
This item is not currently available from our stocks.
Despatch date information is on request.
MS 3056, SKF, Locking clip
Securing plate, Steel, EAN code: 7316577011831
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.