TW065, Timken, Locking washer
Washer, Steel, EAN code: 0053893200989
TW122, Timken, Locking washer
Washer, Steel, EAN code: 0053893822136
KMK 8, SKF, Lock nut with integral locking screw
Nut, Steel, M 40x1.5, EAN code: 7316570172515
KMK 9, SKF, Lock nut with integral locking screw
Nut, Steel, M 45x1.5, EAN code: 7316571106991
MB 16, Neutral, Locking washer
Tab Washer, Steel
MB 19, Neutral, Locking washer
Tab Washer, Steel
W 14, SKF, Locking washer
Washer, Steel, EAN code: 7316571385594
W 16, SKF, Locking washer
Washer, Steel, EAN code: 7316571385600
Z 007 F, SKF, Sealing washers, F design
Washer, Steel, EAN code: 7316570687309
KMFE 10, SKF, Lock nut with integral locking screw
Nut, Steel, M50x1.5, EAN code: 7316571585116
This item is not currently available from our stocks.
Despatch date information is on request.
KMK 15, SKF, Lock nut with integral locking screw
Nut, Steel, M 75x2, EAN code: 7316570506051
KMT 17, SKF, Precision Lock nut
Nut, Steel, M 85x2, EAN code: 7316577655066
TAN20, Timken, Lock nut
Nut, Steel, EAN code: 0053893001395
TAN24, Timken, Lock nut
Nut, Steel, EAN code: 0053893001531
TW111, Timken, Locking washer
Washer, Steel, EAN code: 0053893821917
This item is not currently available from our stocks.
Despatch date information is on request.
AN 24, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660474
KMT 36, SKF, Precision Lock nut
Nut, Steel, M 180x3, EAN code: 7316577655165
MB 8, Neutral, Locking washer
Tab Washer, Steel
N 07, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571280707
KM 33, SKF, Locknut
Nut, Steel, M 165x3, EAN code: 7316577011312
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.