W 30, SKF, Locking washer
Washer, Steel
This item is not currently available from our stocks.
Despatch date information is on request.
TW120, Timken, Locking washer
Washer, Steel, EAN code: 0053893822129
TN07, Timken, Lock nut
Nut, Steel
This item is not currently available from our stocks.
Despatch date information is on request.
TN10, Timken, Lock nut
Nut, Steel, EAN code: 0053893000855
This item is not currently available from our stocks.
Despatch date information is on request.
TN12, Timken, Lock nut
Nut, Steel, EAN code: 0053893000978
Z 010, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316571353562
AN 17, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571353494
MB 22, Neutral, Locking washer
Tab Washer, Steel
MBL 32, SKF, Locking washer
Securing plate, Steel, EAN code: 7316577753021
KM 32, SKF, Locknut
Nut, Steel, M 160x3, EAN code: 7316577011305
Z 008 F, SKF, Sealing washers, F design
Washer, Steel, EAN code: 7316571351148
Z 210, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316577300782
MS 3068-64, SKF, Locking clip
Securing plate, Steel, EAN code: 7316577011855
KM 31, SKF, Locknut
Nut, Steel, M 155x3, EAN code: 7316577011299
KMTA 12, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 60x1.5, EAN code: 7316577655264
KMTA 15, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 75x1.5, EAN code: 7316577655295
W 22, SKF, Locking washer
Washer, Steel, EAN code: 7316576676178
TW110, Timken, Locking washer
Washer, Steel, EAN code: 0053893821320
ZW 42X52, SKF, Spacing washer
Washer, Steel, EAN code: 7316571351087
This item is not currently available from our stocks.
Despatch date information is on request.
MB 1, Neutral, Locking washer
Tab Washer, Steel
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.