KM 9, Neutral, Locknut
Nut, Steel, M 45x1.5
MB 20, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011633
W 15, SKF, Locking washer
Washer, Steel, EAN code: 7316571385655
KM 13, Neutral, Locknut
Nut, Steel, M 65x2
KM 19, SKF, Locknut
Nut, Steel, M 95x2, EAN code: 7316577011176
W 11, SKF, Locking washer
Washer, Steel, EAN code: 7316571385563
KM 19, Neutral, Locknut
Nut, Steel, M 95x2
MB 26, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011688
W 09, SKF, Locking washer
Washer, Steel, EAN code: 7316571385549
W 12, SKF, Locking washer
Washer, Steel, EAN code: 7316571385570
KM 6 Nyloc, Neutral, Locknut
Nut, Steel, M 30x1.5
This item is not currently available from our stocks.
Despatch date information is on request.
KMK 3, SKF, Lock nut with integral locking screw
Nut, Steel, M 17x1, EAN code: 7316571483535
This item is not currently available from our stocks.
Despatch date information is on request.
W 05, Timken, Locking washer
Washer, Steel
This item is not currently available from our stocks.
Despatch date information is on request.
KM 10 Nyloc, Neutral, Locknut
Nut, Steel, M 50x1.5
KM 6, Neutral, Locknut
Nut, Steel, M 30x1.5
MB 14, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571773728
MB 17, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571770215
N 14, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571385471
KM 26, SKF, Locknut
Nut, Steel, M 130x2, EAN code: 7316577011244
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.