KML 34, NKE, Locknut
Nut, Steel, M 170x3, EAN code: 9008745233401
KML 36, NKE, Locknut
Nut, Steel, M 180x3, EAN code: 9008745233418
KML 38, NKE, Locknut
Nut, Steel, M 190x3, EAN code: 9008745233425
KML 38, Timken, Locknut
Nut, Steel, M 190x3, EAN code: 0087796250895
This item is not currently available from our stocks.
Despatch date information is on request.
KMT 0, SKF, Precision Lock nut
Nut, Steel, M 10x0.75, EAN code: 7316577662699
This item is not currently available from our stocks.
Despatch date information is on request.
KMT 0, NKE, Precision Lock nut
Nut, Steel, M 10x0.75, EAN code: 9008745233449
KMT 1, SKF, Precision Lock nut
Nut, Steel, M 12x1, EAN code: 7316577662705
MBL 24, SKF, Locking washer
Securing plate, Steel, EAN code: 7316571090573
This item is not currently available from our stocks.
Despatch date information is on request.
MBL 28, SKF, Locking washer
Securing plate, Steel, EAN code: 7316571081526
This item is not currently available from our stocks.
Despatch date information is on request.
MBL 32, SKF, Locking washer
Securing plate, Steel, EAN code: 7316577753021
This item is not currently available from our stocks.
Despatch date information is on request.
MBL 32, Timken, Locking washer
Securing plate, Steel, EAN code: 0013992211491
MBL 34, Timken, Locking washer
Securing plate, Steel, EAN code: 0013992211545
This item is not currently available from our stocks.
Despatch date information is on request.
MBL 36, SKF, Locking washer
Securing plate, Steel, EAN code: 7316571033082
MBL 36, Timken, Locking washer
Securing plate, Steel, EAN code: 0013992211590
This item is not currently available from our stocks.
Despatch date information is on request.
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.