KMFE 11, SKF, Lock nut with integral locking screw
Nut, Steel, M55x2, EAN code: 7316571585192
This item is not currently available from our stocks.
Despatch date information is on request.
KMFE 22, SKF, Lock nut with integral locking screw
Nut, Steel, M110x2, EAN code: 7316571587844
This item is not currently available from our stocks.
Despatch date information is on request.
KMK 3, SKF, Lock nut with integral locking screw
Nut, Steel, M 17x1, EAN code: 7316571483535
KM 11, Neutral, Locknut
Nut, Steel, M 55x2
KM 17, Neutral, Locknut
Nut, Steel, M 85x2
KM 2, SKF, Locknut
Nut, Steel, M 15x1, EAN code: 7316577754301
KM 28, SKF, Locknut
Nut, Steel, M 140x2, EAN code: 7316577011268
KMFE 5, SKF, Lock nut with integral locking screw
Nut, Steel, M25x1.5, EAN code: 7316571584775
KMT 14, SKF, Precision Lock nut
Nut, Steel, M 70x2, EAN code: 7316577656513
N 13, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571385488
W 07, SKF, Locking washer
Washer, Steel, EAN code: 7316571385525
Z 009, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316570221565
AN 20, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660443
HM 44 T, SKF, T lock/dismounting nut
Nut, Steel, Tr 220x4, EAN code: 7316577010629
KM 10, Neutral, Locknut
Nut, Steel, M 50x1.5
This item is not currently available from our stocks.
Despatch date information is on request.
KMT 22, SKF, Precision Lock nut
Nut, Steel, M 110x2, EAN code: 7316577655097
TAN18, Timken, Lock nut
Nut, Steel, EAN code: 0053893001357
This item is not currently available from our stocks.
Despatch date information is on request.
KM 20, Neutral, Locknut
Nut, Steel, M 100x2
KMK 5, SKF, Lock nut with integral locking screw
Nut, Steel, M 25x1.5, EAN code: 7316571278209
Z 307, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316571351230
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.