KMK 9, SKF, Lock nut with integral locking screw
Nut, Steel, M 45x1.5, EAN code: 7316571106991
TAN130, Timken, Lock nut
Nut, Steel, EAN code: 0053893004136
TN11, Timken, Lock nut
Nut, Steel, EAN code: 0053893000923
AN 15, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571353623
AN 18, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660429
AN 28, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660498
KM 13 Nyloc, Neutral, Locknut
Nut, Steel, M 65x2
KM 21, SKF, Locknut
Nut, Steel, M 105x2, EAN code: 7316577011190
KMK 2, SKF, Lock nut with integral locking screw
Nut, Steel, M 15x1, EAN code: 7316571483528
MB 0, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316570189964
MB 29, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011718
Z 206 F, SKF, Sealing washers, F design
Washer, Steel
KMTA 14, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 70x1.5, EAN code: 7316577655288
KMTA 16, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 80x2, EAN code: 7316577655301
HM 3044, SKF, HM lock nut with metric trapezoidal threads, locked on shaft by MS locking clip
Locknut, Steel, Tr 220x4, EAN code: 7316577010698
TW112, Timken, Locking washer
Washer, Steel, EAN code: 0053893822075
KM 23, SKF, Locknut
Nut, Steel, M 115x2, EAN code: 7316577011213
KMT 36, SKF, Precision Lock nut
Nut, Steel, M 180x3, EAN code: 7316577655165
MB 14, Neutral, Locking washer
Tab Washer, Steel
MB 19, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011626
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.