W 05, Timken, Locking washer
Washer, Steel
This item is not currently available from our stocks.
Despatch date information is on request.
MB 28, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011701
N 14, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571385471
KM 10 Nyloc, Neutral, Locknut
Nut, Steel, M 50x1.5
KM 13, Neutral, Locknut
Nut, Steel, M 65x2
KM 4 Nyloc, Neutral, Locknut
Nut, Steel, M 20x1
KM 6, Neutral, Locknut
Nut, Steel, M 30x1.5
AN 16, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571353487
MB 13, Neutral, Locking washer
Tab Washer, Steel
KM 0, SKF, Locknut
Nut, Steel, M 10x0.75, EAN code: 7316571353432
KMT 8, SKF, Precision Lock nut
Nut, Steel, M 40x1.5, EAN code: 7316577655011
KMT 18, SKF, Precision Lock nut
Nut, Steel, M 90x2, EAN code: 7316577655073
KMT 19, SKF, Precision Lock nut
Nut, Steel, M 95x2, EAN code: 7316577291882
This item is not currently available from our stocks.
Despatch date information is on request.
MB 18, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011619
KM 1, SKF, Locknut
Nut, Steel, M 12x1, EAN code: 7316571353449
KMFE 6, SKF, Lock nut with integral locking screw
Nut, Steel, M30x1.5, EAN code: 7316571584782
KMT 20, SKF, Precision Lock nut
Nut, Steel, M 100x2, EAN code: 7316577655080
W 05, SKF, Locking washer
Washer, Steel, EAN code: 7316571385518
TW115, Timken, Locking washer
Washer, Steel, EAN code: 0053893821924
MS 3052-48, SKF, Locking clip
Securing plate, Steel, EAN code: 7316577058348
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.