W 12, SKF, Locking washer
Washer, Steel, EAN code: 7316571385570
KM 15, SKF, Locknut
Nut, Steel, M 75x2, EAN code: 7316571770253
KM 7 Nyloc, Neutral, Locknut
Nut, Steel, M 35x1.5
KMK 5, SKF, Lock nut with integral locking screw
Nut, Steel, M 25x1.5, EAN code: 7316571278209
MB 17, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571770215
KMT 22, SKF, Precision Lock nut
Nut, Steel, M 110x2, EAN code: 7316577655097
W 09, SKF, Locking washer
Washer, Steel, EAN code: 7316571385549
KMT 28, SKF, Precision Lock nut
Nut, Steel, M 140x2, EAN code: 7316577655127
MB 11, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316570627305
KM 9 Nyloc, Neutral, Locknut
Nut, Steel, M 45x1.5
MB 7, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577757456
TN065, Timken, Lock nut
Nut, Steel, EAN code: 0053893002859
KM 1, SKF, Locknut
Nut, Steel, M 12x1, EAN code: 7316571353449
KMK 10, SKF, Lock nut with integral locking screw
Nut, Steel, M 50x1.5, EAN code: 7316570965087
MB 13, Neutral, Locking washer
Tab Washer, Steel
KM 26, SKF, Locknut
Nut, Steel, M 130x2, EAN code: 7316577011244
KM 10, Neutral, Locknut
Nut, Steel, M 50x1.5
KM 24, SKF, Locknut
Nut, Steel, M 120x2, EAN code: 7316577011220
KM 8 Nyloc, Neutral, Locknut
Nut, Steel, M 40x1.5
KMFE 7, SKF, Lock nut with integral locking screw
Nut, Steel, M35x1.5, EAN code: 7316571584799
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.