KM 40, SKF, Locknut
Nut, Steel, M 200x3, EAN code: 7316577011350
KM 21, SKF, Locknut
Nut, Steel, M 105x2, EAN code: 7316577011190
KM 7 Nyloc, Neutral, Locknut
Nut, Steel, M 35x1.5
N 14, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571385471
W 16, SKF, Locking washer
Washer, Steel, EAN code: 7316571385600
KM 12, Neutral, Locknut
Nut, Steel, M 60x2
KM 16, SKF, Locknut
Nut, Steel, M 80x2, EAN code: 7316571770239
KM 32, SKF, Locknut
Nut, Steel, M 160x3, EAN code: 7316577011305
KMFE 5, SKF, Lock nut with integral locking screw
Nut, Steel, M25x1.5, EAN code: 7316571584775
KML 30, SKF, Locknut
Nut, Steel, M 150x2, EAN code: 7316577055668
MB 26, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011688
KM 15 Nyloc, Neutral, Locknut
Nut, Steel, M 75x2
KM 2, SKF, Locknut
Nut, Steel, M 15x1, EAN code: 7316577754301
KMFE 14, SKF, Lock nut with integral locking screw
Nut, Steel, M70x2, EAN code: 7316571585345
KMFE 6, SKF, Lock nut with integral locking screw
Nut, Steel, M30x1.5, EAN code: 7316571584782
KMFE 7, SKF, Lock nut with integral locking screw
Nut, Steel, M35x1.5, EAN code: 7316571584799
MB 17, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571770215
MB 29, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011718
W 05, SKF, Locking washer
Washer, Steel, EAN code: 7316571385518
HM 52 T, SKF, T lock/dismounting nut
Nut, Steel, Tr 260x4, EAN code: 7316577010650
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.