TN065, Timken, Lock nut
Nut, Steel, EAN code: 0053893002859
KMT 4, SKF, Precision Lock nut
Nut, Steel, M 20x1, EAN code: 7316577662736
MB 17, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571770215
MB 22, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011657
W 15, SKF, Locking washer
Washer, Steel, EAN code: 7316571385655
KM 7, Neutral, Locknut
Nut, Steel, M 35x1.5
KMK 3, SKF, Lock nut with integral locking screw
Nut, Steel, M 17x1, EAN code: 7316571483535
KMFE 7, SKF, Lock nut with integral locking screw
Nut, Steel, M35x1.5, EAN code: 7316571584799
AN 16, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571353487
KM 30, SKF, Locknut
Nut, Steel, M 150x2, EAN code: 7316577011282
KM 5, Neutral, Locknut
Nut, Steel, M 25x1.5
MB 26, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011688
ZW 85X100, SKF, Spacing washer
Washer, Steel
TW103, Timken, Locking washer
Washer, Steel, EAN code: 0053893822013
This item is not currently available from our stocks.
Despatch date information is on request.
KM 28, SKF, Locknut
Nut, Steel, M 140x2, EAN code: 7316577011268
KMT 11, SKF, Precision Lock nut
Nut, Steel, M 55x2, EAN code: 7316577655028
KMT 6, SKF, Precision Lock nut
Nut, Steel, M 30x1.5, EAN code: 7316577291851
KMT 7, SKF, Precision Lock nut
Nut, Steel, M 35x1.5, EAN code: 7316577292605
MB 28, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011701
MB 3, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316570545975
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.