KM 29, SKF, Locknut
Nut, Steel, M 145x2, EAN code: 7316577011275
MB 7, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577757456
KMK 10, SKF, Lock nut with integral locking screw
Nut, Steel, M 50x1.5, EAN code: 7316570965087
TN11, Timken, Lock nut
Nut, Steel, EAN code: 0053893000923
MB 28, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011701
KM 24, SKF, Locknut
Nut, Steel, M 120x2, EAN code: 7316577011220
KMK 14, SKF, Lock nut with integral locking screw
Nut, Steel, M 70x2, EAN code: 7316570280166
KMT 6, SKF, Precision Lock nut
Nut, Steel, M 30x1.5, EAN code: 7316577291851
W 08, SKF, Locking washer
Washer, Steel, EAN code: 7316571385532
W 12, SKF, Locking washer
Washer, Steel, EAN code: 7316571385570
KMK 12, SKF, Lock nut with integral locking screw
Nut, Steel, M 60x2, EAN code: 7316570379334
This item is not currently available from our stocks.
Despatch date information is on request.
KMT 24, SKF, Precision Lock nut
Nut, Steel, M 120x2, EAN code: 7316577655103
This item is not currently available from our stocks.
Despatch date information is on request.
N 10, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571385495
W 06, SKF, Locking washer
Washer, Steel, EAN code: 7316571396620
TW111, Timken, Locking washer
Washer, Steel, EAN code: 0053893821917
MB 10, Neutral, Locking washer
Tab Washer, Steel
KM 1, SKF, Locknut
Nut, Steel, M 12x1, EAN code: 7316571353449
KM 22, SKF, Locknut
Nut, Steel, M 110x2, EAN code: 7316577011206
KMFE 5, SKF, Lock nut with integral locking screw
Nut, Steel, M25x1.5, EAN code: 7316571584775
N 05, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571278735
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.