KMTA 11, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 55x1.5, EAN code: 7316577655257
AN 17, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571353494
KM 28, SKF, Locknut
Nut, Steel, M 140x2, EAN code: 7316577011268
KMFE 14, SKF, Lock nut with integral locking screw
Nut, Steel, M70x2, EAN code: 7316571585345
KML 30, SKF, Locknut
Nut, Steel, M 150x2, EAN code: 7316577055668
KM 40, SKF, Locknut
Nut, Steel, M 200x3, EAN code: 7316577011350
AN 15, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571353623
MB 29, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011718
MB 44, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011787
KM 0, SKF, Locknut
Nut, Steel, M 10x0.75, EAN code: 7316571353432
KM 17, Neutral, Locknut
Nut, Steel, M 85x2
KM 5 Nyloc, Neutral, Locknut
Nut, Steel, M 25x1.5
KM 9 Nyloc, Neutral, Locknut
Nut, Steel, M 45x1.5
KMFE 7, SKF, Lock nut with integral locking screw
Nut, Steel, M35x1.5, EAN code: 7316571584799
W 05, SKF, Locking washer
Washer, Steel, EAN code: 7316571385518
AN 26, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660481
HM 44 T, SKF, T lock/dismounting nut
Nut, Steel, Tr 220x4, EAN code: 7316577010629
HM 52 T, SKF, T lock/dismounting nut
Nut, Steel, Tr 260x4, EAN code: 7316577010650
MB 52, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577001412
KM 27, SKF, Locknut
Nut, Steel, M 135x2, EAN code: 7316577011251
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.