KMFE 5, SKF, Lock nut with integral locking screw
Nut, Steel, M25x1.5, EAN code: 7316571584775
W 09, SKF, Locking washer
Washer, Steel, EAN code: 7316571385549
W 16, SKF, Locking washer
Washer, Steel, EAN code: 7316571385600
W 28, SKF, Locking washer
Washer, Steel, EAN code: 7316576676208
N 13, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571385488
KM 16, SKF, Locknut
Nut, Steel, M 80x2, EAN code: 7316571770239
KM 1, Timken, Locknut
Nut, Steel, M 12x1, EAN code: 0087796212732
KM 10, Neutral, Locknut
Nut, Steel, M 50x1.5
This item is not currently available from our stocks.
Despatch date information is on request.
KMT 38, SKF, Precision Lock nut
Nut, Steel, M 190x3, EAN code: 7316577655172
MB 14, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571773728
MB 17, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571770215
MB 19, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011626
MB 2, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577757968
MB 26, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011688
KM 11, Neutral, Locknut
Nut, Steel, M 55x2
KM 15 Nyloc, Neutral, Locknut
Nut, Steel, M 75x2
KM 7 Nyloc, Neutral, Locknut
Nut, Steel, M 35x1.5
MB 27, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011695
KMK 18, SKF, Lock nut with integral locking screw
Nut, Steel, M 90x2, EAN code: 7316571022550
This item is not currently available from our stocks.
Despatch date information is on request.
KMK 2, SKF, Lock nut with integral locking screw
Nut, Steel, M 15x1, EAN code: 7316571483528
This item is not currently available from our stocks.
Despatch date information is on request.
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.