MB 32, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011732
KM 12, Neutral, Locknut
Nut, Steel, M 60x2
KM 15, Neutral, Locknut
Nut, Steel, M 75x2
KM 21, Neutral, Locknut
Nut, Steel, M 105x2
KMK 9, SKF, Lock nut with integral locking screw
Nut, Steel, M 45x1.5, EAN code: 7316571106991
TW065, Timken, Locking washer
Washer, Steel, EAN code: 0053893200989
KMT 10, SKF, Precision Lock nut
Nut, Steel, M 50x1.5, EAN code: 7316577314062
KMT 14, SKF, Precision Lock nut
Nut, Steel, M 70x2, EAN code: 7316577656513
KMT 8, SKF, Precision Lock nut
Nut, Steel, M 40x1.5, EAN code: 7316577655011
KM 12 Nyloc, Neutral, Locknut
Nut, Steel, M 60x2
KMFE 5, SKF, Lock nut with integral locking screw
Nut, Steel, M25x1.5, EAN code: 7316571584775
MB 11, Neutral, Locking washer
Tab Washer, Steel
MB 19, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011626
MB 20, Neutral, Locking washer
Tab Washer, Steel
MB 7, Neutral, Locking washer
Tab Washer, Steel
N 13, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571385488
W 18, SKF, Locking washer
Washer, Steel, EAN code: 7316576676130
Z 307, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316571351230
ZW 80X90, SKF, Spacing washer
Washer, Steel, EAN code: 7316571385631
KMT 38, SKF, Precision Lock nut
Nut, Steel, M 190x3, EAN code: 7316577655172
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.