KM 19, Neutral, Locknut
Nut, Steel, M 95x2
KM 26, SKF, Locknut
Nut, Steel, M 130x2, EAN code: 7316577011244
KMK 4, SKF, Lock nut with integral locking screw
Nut, Steel, M 20x1, EAN code: 7316571483542
KMT 6, SKF, Precision Lock nut
Nut, Steel, M 30x1.5, EAN code: 7316577291851
MB 12, Neutral, Locking washer
Tab Washer, Steel
MB 26, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011688
W 13, SKF, Locking washer
Washer, Steel, EAN code: 7316571385587
Z 009, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316570221565
KMT 17, SKF, Precision Lock nut
Nut, Steel, M 85x2, EAN code: 7316577655066
KMT 28, SKF, Precision Lock nut
Nut, Steel, M 140x2, EAN code: 7316577655127
This item is not currently available from our stocks.
Despatch date information is on request.
KMT 30, SKF, Precision Lock nut
Nut, Steel, M 150x2, EAN code: 7316577655134
TAN18, Timken, Lock nut
Nut, Steel, EAN code: 0053893001357
This item is not currently available from our stocks.
Despatch date information is on request.
TAN22, Timken, Lock nut
Nut, Steel, EAN code: 0053893001494
TW111, Timken, Locking washer
Washer, Steel, EAN code: 0053893821917
TN11, Timken, Lock nut
Nut, Steel, EAN code: 0053893000923
KM 2, SKF, Locknut
Nut, Steel, M 15x1, EAN code: 7316577754301
KM 20, Neutral, Locknut
Nut, Steel, M 100x2
KM 22 Nyloc, Neutral, Locknut
Nut, Steel, M 110x2
KM 9 Nyloc, Neutral, Locknut
Nut, Steel, M 45x1.5
KMK 8, SKF, Lock nut with integral locking screw
Nut, Steel, M 40x1.5, EAN code: 7316570172515
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.