21-30 of 30 products
KM 27, Timken, Locknut
Nut, Steel, M 135x2, EAN code: 0087796212947
Brand | Timken |
---|---|
Mfr Part No. | KM 27 |
KM 28, FAG, Locknut
Nut, Steel, M140x2, EAN code: 4012801222990
Brand | FAG |
---|---|
Mfr Part No. | KM 28 |
KM 28, NKE, Locknut
Nut, Steel, M 140x2, EAN code: 9008745724725
Brand | NKE |
---|---|
Mfr Part No. | KM 28 |
KM 28, RHP, Locknut
Nut, Steel, M 140x2, EAN code: 00747023116638
Brand | RHP |
---|---|
Mfr Part No. | KM 28 |
KML 28, SKF, Locknut
Nut, Steel, M 140x2, EAN code: 7316571048918
Brand | SKF |
---|---|
Mfr Part No. | KML 28 |
KML 28, NKE, Locknut
Nut, Steel, M 140x2, EAN code: 9008745233371
Brand | NKE |
---|---|
Mfr Part No. | KML 28 |
KMT 7, NKE, Precision Lock nut
Nut, Steel, M 35x1.5, EAN code: 9008745731945
Brand | NKE |
---|---|
Mfr Part No. | KMT 7 |
ZM110, INA, Precision locknut
Precision locknut, Steel, M110X2, EAN code: 4012802453904
Brand | INA |
---|---|
Mfr Part No. | ZM110 |
ZMA30/52, INA, Precision locknuts ZMA, locking pegs, radially arranged, heavy series
Precision locknut, Steel, M30X1, 5, EAN code: 4012802079449
Brand | INA |
---|---|
Mfr Part No. | ZMA30/52 |
ZMA40/62, INA, Precision locknuts ZMA, locking pegs, radially arranged, heavy series
Precision locknut, Steel, M40X1, 5, EAN code: 4012802434620
Brand | INA |
---|---|
Mfr Part No. | ZMA40/62 |
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.