Z 205 F, SKF, Sealing washers, F design
Washer, Steel, EAN code: 7316571353616
This item is currently out of stock.
You may place your order now and we will dispatch it as soon as stock arrives.
TW115, Timken, Locking washer
Washer, Steel, EAN code: 0053893821924
TN09, Timken, Lock nut
Nut, Steel, EAN code: 0053893000824
KMTA 11, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 55x1.5, EAN code: 7316577655257
This item is currently out of stock.
You may place your order now and we will dispatch it as soon as stock arrives.
HM 3048, SKF, HM lock nut with metric trapezoidal threads, locked on shaft by MS locking clip
Locknut, Steel, Tr 240x4, EAN code: 7316577010704
HM 3064, SKF, HM lock nut with metric trapezoidal threads, locked on shaft by MS locking clip
Locknut, Steel, Tr 320x5, EAN code: 7316577010735
MB 32, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011732
Z 008 F, SKF, Sealing washers, F design
Washer, Steel, EAN code: 7316571351148
Z 206, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316571501260
ZM20, INA, Precision locknut
Precision locknut, Steel, M20X1, EAN code: 4012802079326
ZW 70X80, SKF, Spacing washer
Washer, Steel, EAN code: 7316571351100
KML 26, SKF, Locknut
Nut, Steel, M 130x2, EAN code: 7316577711700
KMT 20, SKF, Precision Lock nut
Nut, Steel, M 100x2, EAN code: 7316577655080
KMT 3, SKF, Precision Lock nut
Nut, Steel, M 17x1, EAN code: 7316577662729
KMT 4, Neutral, Precision Lock nut
Nut, Steel, M 20x1
KM 1, Neutral, Locknut
Nut, Steel, M 12x1
KM 12 Nyloc, Neutral, Locknut
Nut, Steel, M 60x2
KM 17, Neutral, Locknut
Nut, Steel, M 85x2
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.