TW134, Timken, Locking washer
Washer, Steel, EAN code: 0053893822181
TAN128, Timken, Lock nut
Nut, Steel, EAN code: 0053893004075
TAN136, Timken, Lock nut
Nut, Steel, EAN code: 0053893004280
This item is not currently available from our stocks.
Despatch date information is on request.
TAN15, Timken, Lock nut
Nut, Steel, EAN code: 0053893001227
This item is not currently available from our stocks.
Despatch date information is on request.
TAN17, Timken, Lock nut
Nut, Steel, EAN code: 0053893001319
This item is not currently available from our stocks.
Despatch date information is on request.
TN08, Timken, Lock nut
Nut, Steel, EAN code: 0053893000800
This item is not currently available from our stocks.
Despatch date information is on request.
TN09, Timken, Lock nut
Nut, Steel, EAN code: 0053893000824
This item is not currently available from our stocks.
Despatch date information is on request.
W 19, SKF, Locking washer
Washer, Steel, EAN code: 7316576676147
W 26, SKF, Locking washer
Washer, Steel, EAN code: 7316576676192
W 32, Timken, Locking washer
Washer, Steel
This item is not currently available from our stocks.
Despatch date information is on request.
Z 007, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316571351131
Z 010 F, SKF, Sealing washers, F design
Washer, Steel
Z 013, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316571353579
Z 204 F, SKF, Sealing washers, F design
Washer, Steel, EAN code: 7316570415025
This item is not currently available from our stocks.
Despatch date information is on request.
MB 32, Neutral, Locking washer
Tab Washer, Steel
MB 9, Timken, Locking washer
Tab Washer, Steel, EAN code: 0087796028401
KM 21, Neutral, Locknut
Nut, Steel, M 105x2
KM 3, Neutral, Locknut
Nut, Steel, M 17x1
KM 31, Neutral, Locknut
Nut, Steel, M 155x3
KMFE 15, SKF, Lock nut with integral locking screw
Nut, Steel, M75x2, EAN code: 7316571585352
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.