MB 7 NP, Neutral, Locking washer
Tab Washer, Nickel plated
MB 7, Timken, Locking washer
Tab Washer, Steel, EAN code: 0087796028388
MB 8 A, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316572309988
MB 8, Timken, Locking washer
Tab Washer, Steel, EAN code: 0087796028395
MB 9 NP, Neutral, Locking washer
Tab Washer, Nickel plated
KM 9, Timken, Locknut
Nut, Steel, M 45x1.5, EAN code: 0087796028845
KML 26, SKF, Locknut
Nut, Steel, M 130x2, EAN code: 7316577711700
KMT 0, Neutral, Precision Lock nut
Nut, Steel, M 10x0.75
KMT 14, Neutral, Precision Lock nut
Nut, Steel, M 70x2
KMT 20, Neutral, Precision Lock nut
Nut, Steel, M 100x2
KMT 22, Neutral, Precision Lock nut
Nut, Steel, M 110x2
KMT 32, Neutral, Precision Lock nut
Nut, Steel, M 160x3
KMT 6, NKE, Precision Lock nut
Nut, Steel, M 30x1.5, EAN code: 9008745233715
MB 0, Neutral, Locking washer
Tab Washer, Steel
MB 10 NP, Neutral, Locking washer
Tab Washer, Nickel plated
MB 10, RHP, Locking washer
Tab Washer, Steel, EAN code: 00747023115754
MB 12 NP, Neutral, Locking washer
Tab Washer, Nickel plated
MB 13, FAG, Locking washer
Tab Washer, Steel, EAN code: 4054369880243
MB 14 NP, Neutral, Locking washer
Tab Washer, Nickel plated
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.