1-15 of 15 products
KMK 15, SKF, Lock nut with integral locking screw
Nut, Steel, M 75x2, EAN code: 7316570506051
Brand | SKF |
---|---|
Mfr Part No. | KMK 15 |
KMFE 11, SKF, Lock nut with integral locking screw
Nut, Steel, M55x2, EAN code: 7316571585192
Brand | SKF |
---|---|
Mfr Part No. | KMFE 11 |
KMK 13, SKF, Lock nut with integral locking screw
Nut, Steel, M 65x2, EAN code: 7316570928730
Brand | SKF |
---|---|
Mfr Part No. | KMK 13 |
KMK 14, SKF, Lock nut with integral locking screw
Nut, Steel, M 70x2, EAN code: 7316570280166
Brand | SKF |
---|---|
Mfr Part No. | KMK 14 |
KMT 1, SKF, Precision Lock nut
Nut, Steel, M 12x1, EAN code: 7316577662705
Brand | SKF |
---|---|
Mfr Part No. | KMT 1 |
KMT 0, SKF, Precision Lock nut
Nut, Steel, M 10x0.75, EAN code: 7316577662699
Brand | SKF |
---|---|
Mfr Part No. | KMT 0 |
KMFE 12, SKF, Lock nut with integral locking screw
Nut, Steel, M60x2, EAN code: 7316571585307
Brand | SKF |
---|---|
Mfr Part No. | KMFE 12 |
KMT 0, Neutral, Precision Lock nut
Nut, Steel, M 10x0.75
Brand | Neutral |
---|---|
Mfr Part No. | KMT 0 |
KMT 1, Neutral, Precision Lock nut
Nut, Steel, M 12x1
Brand | Neutral |
---|---|
Mfr Part No. | KMT 1 |
KMFE 10, SKF, Lock nut with integral locking screw
Nut, Steel, M50x1.5, EAN code: 7316571585116
Brand | SKF |
---|---|
Mfr Part No. | KMFE 10 |
KMT 0, NKE, Precision Lock nut
Nut, Steel, M 10x0.75, EAN code: 9008745233449
Brand | NKE |
---|---|
Mfr Part No. | KMT 0 |
KMT 1, NKE, Precision Lock nut
Nut, Steel, M 12x1, EAN code: 9008745233456
Brand | NKE |
---|---|
Mfr Part No. | KMT 1 |
ZM40, INA, Precision locknut
Precision locknut, Steel, M40X1, 5, EAN code: 4012802079364
Brand | INA |
---|---|
Mfr Part No. | ZM40 |
ZM45, INA, Precision locknut
Precision locknut, Steel, M45X1, 5, EAN code: 4012802079371
Brand | INA |
---|---|
Mfr Part No. | ZM45 |
ZM50, INA, Precision locknut
Precision locknut, Steel, M50X1, 5, EAN code: 4012802079388
Brand | INA |
---|---|
Mfr Part No. | ZM50 |
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.