1-17 of 17 products
KM 25, SKF, Locknut
Nut, Steel, M 125x2, EAN code: 7316577011237
Brand | SKF |
---|---|
Mfr Part No. | KM 25 |
KM 26, SKF, Locknut
Nut, Steel, M 130x2, EAN code: 7316577011244
Brand | SKF |
---|---|
Mfr Part No. | KM 26 |
KM 25, Neutral, Locknut
Nut, Steel, M 125x2
Brand | Neutral |
---|---|
Mfr Part No. | KM 25 |
KM 26, Neutral, Locknut
Nut, Steel, M 130x2
Brand | Neutral |
---|---|
Mfr Part No. | KM 26 |
KML 26, SKF, Locknut
Nut, Steel, M 130x2, EAN code: 7316577711700
Brand | SKF |
---|---|
Mfr Part No. | KML 26 |
KM 25, FAG, Locknut
Nut, Steel, M125x2, EAN code: 4012801222976
Brand | FAG |
---|---|
Mfr Part No. | KM 25 |
KM 25, NKE, Locknut
Nut, Steel, M 125x2, EAN code: 9008745731877
Brand | NKE |
---|---|
Mfr Part No. | KM 25 |
KM 25, RHP, Locknut
Nut, Steel, M 125x2, EAN code: 00747023116607
Brand | RHP |
---|---|
Mfr Part No. | KM 25 |
KM 25, Timken, Locknut
Nut, Steel, M 125x2, EAN code: 0087796212930
Brand | Timken |
---|---|
Mfr Part No. | KM 25 |
KM 26, FAG, Locknut
Nut, Steel, M130x2, EAN code: 4012801222983
Brand | FAG |
---|---|
Mfr Part No. | KM 26 |
KM 26, NKE, Locknut
Nut, Steel, M 130x2, EAN code: 9008745731884
Brand | NKE |
---|---|
Mfr Part No. | KM 26 |
KM 26, RHP, Locknut
Nut, Steel, M 130x2, EAN code: 00747023116614
Brand | RHP |
---|---|
Mfr Part No. | KM 26 |
KM 26, Timken, Locknut
Nut, Steel, M 130x2, EAN code: 0087796028753
Brand | Timken |
---|---|
Mfr Part No. | KM 26 |
KMFE 20, SKF, Lock nut with integral locking screw
Nut, Steel, M100x2, EAN code: 7316571587820
Brand | SKF |
---|---|
Mfr Part No. | KMFE 20 |
KMFE 21, SKF, Lock nut with integral locking screw
Nut, Steel, M105x2, EAN code: 7316571587837
Brand | SKF |
---|---|
Mfr Part No. | KMFE 21 |
KML 26, NKE, Locknut
Nut, Steel, M 130x2, EAN code: 9008745233364
Brand | NKE |
---|---|
Mfr Part No. | KML 26 |
KML 26, Timken, Locknut
Nut, Steel, M 130x2, EAN code: 0013992212269
Brand | Timken |
---|---|
Mfr Part No. | KML 26 |
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.