1-8 of 8 products
KM 36, SKF, Locknut
Nut, Steel, M 180x3, EAN code: 7316577011336
Brand | SKF |
---|---|
Mfr Part No. | KM 36 |
KM 36, Neutral, Locknut
Nut, Steel, M 180x3
Brand | Neutral |
---|---|
Mfr Part No. | KM 36 |
KML 36, SKF, Locknut
Nut, Steel, M 180x3, EAN code: 7316571147963
Brand | SKF |
---|---|
Mfr Part No. | KML 36 |
KM 36, FAG, Locknut
Nut, Steel, M180x3, EAN code: 4012801223072
Brand | FAG |
---|---|
Mfr Part No. | KM 36 |
KM 36, NKE, Locknut
Nut, Steel, M 180x3, EAN code: 9008745233265
Brand | NKE |
---|---|
Mfr Part No. | KM 36 |
KM 36, RHP, Locknut
Nut, Steel, M 180x3, EAN code: 00747023116706
Brand | RHP |
---|---|
Mfr Part No. | KM 36 |
KM 36, Timken, Locknut
Nut, Steel, M 180x3, EAN code: 0087796212985
Brand | Timken |
---|---|
Mfr Part No. | KM 36 |
KML 36, NKE, Locknut
Nut, Steel, M 180x3, EAN code: 9008745233418
Brand | NKE |
---|---|
Mfr Part No. | KML 36 |
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.