1-11 of 11 products
MOCC25-12-A, Ruland, A clamp oldham coupling hub, with keyway
Metric, Aluminium, Oldham coupling component, HUB
Brand | Ruland |
---|---|
Mfr Part No. | MOCC25-12-A |
MOCC51-12-A, Ruland, A clamp oldham coupling hub, with keyway
Metric, Aluminium, Oldham coupling component, HUB
Brand | Ruland |
---|---|
Mfr Part No. | MOCC51-12-A |
MOCT25-12-A, Ruland, A clamp oldham coupling hub
Metric, Aluminium, Oldham coupling component, HUB
Brand | Ruland |
---|---|
Mfr Part No. | MOCT25-12-A |
MOCT33-12-A, Ruland, A clamp oldham coupling hub
Metric, Aluminium, Oldham coupling component, HUB
Brand | Ruland |
---|---|
Mfr Part No. | MOCT33-12-A |
MOCT41-12-A, Ruland, A clamp oldham coupling hub
Metric, Aluminium, Oldham coupling component, HUB
Brand | Ruland |
---|---|
Mfr Part No. | MOCT41-12-A |
MOCT41-12-SS, Ruland, A clamp oldham coupling hub
Metric, Stainless Steel, Oldham coupling component, HUB
Brand | Ruland |
---|---|
Mfr Part No. | MOCT41-12-SS |
MOCT51-12-A, Ruland, A clamp oldham coupling hub
Metric, Aluminium, Oldham coupling component, HUB
Brand | Ruland |
---|---|
Mfr Part No. | MOCT51-12-A |
MOSC25-12-A, Ruland, A set screw oldham coupling hub, with keyway
Metric, Aluminium, Oldham coupling component, HUB
Brand | Ruland |
---|---|
Mfr Part No. | MOSC25-12-A |
MOSC33-12-A, Ruland, A set screw oldham coupling hub, with keyway
Metric, Aluminium, Oldham coupling component, HUB
Brand | Ruland |
---|---|
Mfr Part No. | MOSC33-12-A |
MOST33-12-A, Ruland, A set screw oldham coupling hub
Metric, Aluminium, Oldham coupling component, HUB
Brand | Ruland |
---|---|
Mfr Part No. | MOST33-12-A |
MOST33-12-SS, Ruland, A set screw oldham coupling hub
Metric, Stainless Steel, Oldham coupling component, HUB
Brand | Ruland |
---|---|
Mfr Part No. | MOST33-12-SS |
What is an Oldham coupling?
Oldham Couplings are champions of high parallel misalignment applications. Highly customizable, the three-piece assembly uses three disk materials that can be tailored to the performance required. Oldham couplings can be used in lots of industries, such as food & beverage, using stainless hubs with PEEK disks, the medical industry or semiconductor applications.
Due to their flexibility, Oldham Couplings are generally considered to be a good starting point in system design.
- Ease of use
- Zero-backlash operation – Tenons on the hub locate in the slots on the disc which allow the Oldham coupling to operate with zero backlash
- Application flexibility - Hubs can be clamp or set screw, keyed or keyless, (providing they are the same diameter) and have inch or metric bores. Disks are available in acetal for zero-backlash and high torsional stiffness, nylon for dampening, and PEEK for high temperature.
- High parallel misalignment capabilities
- Electrical isolation – No metal to metal contact, so delicate instruments can be protected from electrical currents
- High parallel misalignment capabilities - Oldham couplings are capable of accommodating parallel misalignment up to 10% of their OD.
- Blind assembly – Can be used where shaft access is limited
- Mechanical fuse - In a torque overload situation, the disk will fail completely effectively stopping power transmission. This can be used to protect expensive system components from premature wear or failure.
- Low replacement cost - When the coupling fails the disk breaks and is generally the only item that needs replacing. Disks are inexpensive and can be installed quickly leading to reduced downtime