PHG 110-XL-037, SKF, Synchronous Imperial Timing Belt - PHG 110-XL-037
Imperial, Rubber, Timing belt, EAN code: 07316572595688
PHG 1700-H-100, SKF, Synchronous Imperial Timing Belt - PHG 1700-H-100
Imperial, Rubber, Timing belt, EAN code: 07316572594483
PHG 420-H-100, SKF, Synchronous Imperial Timing Belt - PHG 420-H-100
Imperial, Rubber, Timing belt, EAN code: 07316572593202
PHG 510-L-075, SKF, Synchronous Imperial Timing Belt - PHG 510-L-075
Imperial, Rubber, Timing belt, EAN code: 07316572595237
PHG 225-L-075, SKF, Synchronous Imperial Timing Belt - PHG 225-L-075
Imperial, Rubber, Timing belt, EAN code: 07316572594711
PHG 150-XL-037, SKF, Synchronous Imperial Timing Belt - PHG 150-XL-037
Imperial, Rubber, Timing belt, EAN code: 07316572595985
PHG 124-L-050, SKF, Synchronous Imperial Timing Belt - PHG 124-L-050
Imperial, Rubber, Timing belt, EAN code: 07316572594544
PHG 120-XL-037, SKF, Synchronous Imperial Timing Belt - PHG 120-XL-037
Imperial, Rubber, Timing belt, EAN code: 07316572595749
PHG 240-H-100, SKF, Synchronous Imperial Timing Belt - PHG 240-H-100
Imperial, Rubber, Timing belt, EAN code: 07316572592588
PHG 240-L-050, SKF, Synchronous Imperial Timing Belt - PHG 240-L-050
Imperial, Rubber, Timing belt, EAN code: 07316572594735
PHG 187-L-075, SKF, Synchronous Imperial Timing Belt - PHG 187-L-075
Imperial, Rubber, Timing belt, EAN code: 07316572594674
PHG 510-H-150, SKF, Synchronous Imperial Timing Belt - PHG 510-H-150
Imperial, Rubber, Timing belt, EAN code: 07316572593431
PHG 800-H-200, SKF, Synchronous Imperial Timing Belt - PHG 800-H-200
Imperial, Rubber, Timing belt, EAN code: 07316572594087
PHG 270-H-150, SKF, Synchronous Imperial Timing Belt - PHG 270-H-150
Imperial, Rubber, Timing belt, EAN code: 07316572592687
PHG 345-L-075, SKF, Synchronous Imperial Timing Belt - PHG 345-L-075
Imperial, Rubber, Timing belt, EAN code: 07316572594933
PHG 270-L-050, SKF, Synchronous Imperial Timing Belt - PHG 270-L-050
Imperial, Rubber, Timing belt, EAN code: 07316572594797
PHG 270-L-100, SKF, Synchronous Imperial Timing Belt - PHG 270-L-100
Imperial, Rubber, Timing belt, EAN code: 07316572594810
PHG 240-L-100, SKF, Synchronous Imperial Timing Belt - PHG 240-L-100
Imperial, Rubber, Timing belt, EAN code: 07316572594759
PHG 200-XL-037, SKF, Synchronous Imperial Timing Belt - PHG 200-XL-037
Imperial, Rubber, Timing belt, EAN code: 07316572596197
PHG 450-H-200, SKF, Synchronous Imperial Timing Belt - PHG 450-H-200
Imperial, Rubber, Timing belt, EAN code: 07316572593271
Common imperial pitches include
-
MXL
-
XL
-
L
-
H
-
XH
-
XXH
Each pitch is designed for specific torque and load capacities, making correct selection essential.
Key Benefits
- Positive drive with zero slippage
- Precise shaft synchronisation
- High efficiency power transmission
- Reduced maintenance compared to chain drives
- Smooth, low-noise operation
- Long service life
Imperial synchronous belts are widely used where consistent positioning and repeatability are critical.
Available Sizes & Specifications
When selecting an imperial timing belt, key factors include:
-
Pitch type (e.g., XL, L, H)
-
Belt length (in inches)
-
Belt width (in inches)
-
Tooth profile
-
Construction material (neoprene, polyurethane)
-
Tensile reinforcement type
If you have an existing belt code, it typically includes pitch and length information for easy identification.
Imperial Timing Belts FAQs
Are imperial and metric timing belts interchangeable?
No. Imperial belts use inch-based pitch measurements, while metric belts use millimetres (e.g., 5M, 8M, 14M). They are not interchangeable, even if they appear similar in size.
How do I identify my imperial timing belt size?
You will need to confirm:
-
Belt pitch (e.g., XL, L, H)
-
Belt length (in inches)
-
Belt width (in inches)
Most belts have a printed code that includes this information. If the marking is worn, measuring tooth pitch and belt length can help determine the correct replacement.
What causes imperial timing belts to fail?
Common causes of failure include:
-
Incorrect belt tension
-
Pulley misalignment
-
Overloading
-
Contamination from oil or debris
-
Mixing metric and imperial components
Routine inspection and proper installation significantly extend belt life.