108-XL-031, Gates, PowerGrip® Imperial Timing Belt - 9277-42528
Imperial, Rubber, Timing belt, EAN code: 5414465077791
108-XL-031, Optibelt, ZR Imperial Timing Belt
Imperial, Rubber, Timing belt
108-XL-037, Gates, PowerGrip® Imperial Timing Belt - 9277-40506
Imperial, Rubber, Timing belt, EAN code: 5412571233964
108-XL-037, Optibelt, ZR Imperial Timing Belt
Imperial, Rubber, Timing belt
1080-MXL-012, Optibelt, ZR Imperial Timing Belt
Imperial, Rubber, Timing belt
1080-MXL-019, Optibelt, ZR Imperial Timing Belt
Imperial, Rubber, Timing belt
1080-MXL-025, Optibelt, ZR Imperial Timing Belt
Imperial, Rubber, Timing belt
109-L-050, Optibelt, ZR Imperial Timing Belt
Imperial, Rubber, Timing belt
109-L-075, Optibelt, ZR Imperial Timing Belt
Imperial, Rubber, Timing belt
109-L-100, Optibelt, ZR Imperial Timing Belt
Imperial, Rubber, Timing belt
160-XL-025, Gates, PowerGrip® Imperial Timing Belt - 9257-21016
Imperial, Rubber, Timing belt, EAN code: 5412571224139
160-XL-025, Optibelt, ZR Imperial Timing Belt
Imperial, Rubber, Timing belt
160-XL-031, ContiTech, CONTI® SYNCHROBELT Imperial Timing Belt
Imperial, Rubber, Timing belt, EAN code: 4051817009355
160-XL-031, Gates, PowerGrip® Imperial Timing Belt - 9277-52330
Imperial, Rubber, Timing belt, EAN code: 5412571254532
160-XL-031, Optibelt, ZR Imperial Timing Belt
Imperial, Rubber, Timing belt
PHG 160-XL-037, SKF, Synchronous Imperial Timing Belt - PHG 160-XL-037
Imperial, Rubber, Timing belt, EAN code: 07316572596012
160-XL-037, Gates, PowerGrip® Imperial Timing Belt - 9257-22016
Imperial, Rubber, Timing belt, EAN code: 5412571224344
160-XL-037, Optibelt, ZR Imperial Timing Belt
Imperial, Rubber, Timing belt
1600-MXL-012, Gates, PowerGrip® Imperial Timing Belt - 9277-41384
Imperial, Rubber, Timing belt, EAN code: 5412571236804
1600-MXL-012, Optibelt, ZR Imperial Timing Belt
Imperial, Rubber, Timing belt
Common imperial pitches include
-
MXL
-
XL
-
L
-
H
-
XH
-
XXH
Each pitch is designed for specific torque and load capacities, making correct selection essential.
Key Benefits
- Positive drive with zero slippage
- Precise shaft synchronisation
- High efficiency power transmission
- Reduced maintenance compared to chain drives
- Smooth, low-noise operation
- Long service life
Imperial synchronous belts are widely used where consistent positioning and repeatability are critical.
Available Sizes & Specifications
When selecting an imperial timing belt, key factors include:
-
Pitch type (e.g., XL, L, H)
-
Belt length (in inches)
-
Belt width (in inches)
-
Tooth profile
-
Construction material (neoprene, polyurethane)
-
Tensile reinforcement type
If you have an existing belt code, it typically includes pitch and length information for easy identification.
Imperial Timing Belts FAQs
Are imperial and metric timing belts interchangeable?
No. Imperial belts use inch-based pitch measurements, while metric belts use millimetres (e.g., 5M, 8M, 14M). They are not interchangeable, even if they appear similar in size.
How do I identify my imperial timing belt size?
You will need to confirm:
-
Belt pitch (e.g., XL, L, H)
-
Belt length (in inches)
-
Belt width (in inches)
Most belts have a printed code that includes this information. If the marking is worn, measuring tooth pitch and belt length can help determine the correct replacement.
What causes imperial timing belts to fail?
Common causes of failure include:
-
Incorrect belt tension
-
Pulley misalignment
-
Overloading
-
Contamination from oil or debris
-
Mixing metric and imperial components
Routine inspection and proper installation significantly extend belt life.