630-XL-025, Optibelt, ZR Imperial Timing Belt
Imperial, Rubber, Timing belt
630-XL-031, ContiTech, CONTI® SYNCHROBELT Imperial Timing Belt
Imperial, Rubber, Timing belt, EAN code: 4051817011488
630-XL-031, Optibelt, ZR Imperial Timing Belt
Imperial, Rubber, Timing belt
630-XL-037, ContiTech, CONTI® SYNCHROBELT Imperial Timing Belt
Imperial, Rubber, Timing belt, EAN code: 4051817011495
630-XL-037, Optibelt, ZR Imperial Timing Belt
Imperial, Rubber, Timing belt
632-MXL-012, Gates, PowerGrip® Imperial Timing Belt - 9277-41096
Imperial, Rubber, Timing belt, EAN code: 5412571235517
632-MXL-012, Optibelt, ZR Imperial Timing Belt
Imperial, Rubber, Timing belt
632-MXL-019, Gates, PowerGrip® Imperial Timing Belt - 9277-41097
Imperial, Rubber, Timing belt, EAN code: 5412571235524
632-MXL-019, Optibelt, ZR Imperial Timing Belt
Imperial, Rubber, Timing belt
632-MXL-025, Gates, PowerGrip® Imperial Timing Belt - 9277-41098
Imperial, Rubber, Timing belt, EAN code: 5412571235531
632-MXL-025, Optibelt, ZR Imperial Timing Belt
Imperial, Rubber, Timing belt
80-XL-025, Gates, PowerGrip® Imperial Timing Belt - 9257-21008
Imperial, Rubber, Timing belt, EAN code: 5412571224054
80-XL-025, Optibelt, ZR Imperial Timing Belt
Imperial, Rubber, Timing belt
80-XL-031, ContiTech, CONTI® SYNCHROBELT Imperial Timing Belt
Imperial, Rubber, Timing belt, EAN code: 4051817008396
80-XL-031, Gates, PowerGrip® Imperial Timing Belt - 9277-51975
Imperial, Rubber, Timing belt, EAN code: 5412571252590
80-XL-031, Optibelt, ZR Imperial Timing Belt
Imperial, Rubber, Timing belt
80-XL-037, Gates, PowerGrip® Imperial Timing Belt - 9257-22008
Imperial, Rubber, Timing belt, EAN code: 5412571224269
80-XL-037, Optibelt, ZR Imperial Timing Belt
Imperial, Rubber, Timing belt
PHG 800-H-075, SKF, Synchronous Imperial Timing Belt - PHG 800-H-075
Imperial, Rubber, Timing belt, EAN code: 07316572594056
800-H-075, Gates, PowerGrip® Imperial Timing Belt - 9257-41080
Imperial, Rubber, Timing belt, EAN code: 5412571225211
Common imperial pitches include
-
MXL
-
XL
-
L
-
H
-
XH
-
XXH
Each pitch is designed for specific torque and load capacities, making correct selection essential.
Key Benefits
- Positive drive with zero slippage
- Precise shaft synchronisation
- High efficiency power transmission
- Reduced maintenance compared to chain drives
- Smooth, low-noise operation
- Long service life
Imperial synchronous belts are widely used where consistent positioning and repeatability are critical.
Available Sizes & Specifications
When selecting an imperial timing belt, key factors include:
-
Pitch type (e.g., XL, L, H)
-
Belt length (in inches)
-
Belt width (in inches)
-
Tooth profile
-
Construction material (neoprene, polyurethane)
-
Tensile reinforcement type
If you have an existing belt code, it typically includes pitch and length information for easy identification.
Imperial Timing Belts FAQs
Are imperial and metric timing belts interchangeable?
No. Imperial belts use inch-based pitch measurements, while metric belts use millimetres (e.g., 5M, 8M, 14M). They are not interchangeable, even if they appear similar in size.
How do I identify my imperial timing belt size?
You will need to confirm:
-
Belt pitch (e.g., XL, L, H)
-
Belt length (in inches)
-
Belt width (in inches)
Most belts have a printed code that includes this information. If the marking is worn, measuring tooth pitch and belt length can help determine the correct replacement.
What causes imperial timing belts to fail?
Common causes of failure include:
-
Incorrect belt tension
-
Pulley misalignment
-
Overloading
-
Contamination from oil or debris
-
Mixing metric and imperial components
Routine inspection and proper installation significantly extend belt life.