PHG 540-H-200, SKF, Synchronous Imperial Timing Belt - PHG 540-H-200
Imperial, Rubber, Timing belt, EAN code: 07316572593493
540-H-200, Gates, PowerGrip® Imperial Timing Belt - 9257-44054
Imperial, Rubber, Timing belt, EAN code: 5412571225877
540-L-075, Gates, PowerGrip® Imperial Timing Belt - 9257-32054
Imperial, Rubber, Timing belt, EAN code: 5412571224832
540-XL-025, Gates, PowerGrip® Imperial Timing Belt - 9257-90170
Imperial, Rubber, Timing belt, EAN code: 5412571227024
540-XL-037, Gates, PowerGrip® Imperial Timing Belt - 9277-52884
Imperial, Rubber, Timing belt, EAN code: 5412571257816
560-XH-300, ContiTech, CONTI® SYNCHROBELT Imperial Timing Belt
Imperial, Rubber, Timing belt, EAN code: 4051817007832
560-XH-300, Gates, PowerGrip® Imperial Timing Belt - 9257-52056
Imperial, Rubber, Timing belt, EAN code: 5412571226409
560-XH-300, Optibelt, ZR Imperial Timing Belt
Imperial, Rubber, Timing belt
520-MXL-012, Gates, PowerGrip® Imperial Timing Belt - 9277-53925
Imperial, Rubber, Timing belt, EAN code: 5412571262841
530-H-200, Optibelt, ZR Imperial Timing Belt
Imperial, Rubber, Timing belt
850-H-100, Gates, PowerGrip® Imperial Timing Belt - 9257-42085
Imperial, Rubber, Timing belt, EAN code: 5412571225464
850-H-200, ContiTech, CONTI® SYNCHROBELT Imperial Timing Belt
Imperial, Rubber, Timing belt, EAN code: 4051817003551
850-H-200, Gates, PowerGrip® Imperial Timing Belt - 9257-44085
Imperial, Rubber, Timing belt, EAN code: 5412571225952
850-H-200, Optibelt, ZR Imperial Timing Belt
Imperial, Rubber, Timing belt
950-H-150, Optibelt, ZR Imperial Timing Belt
Imperial, Rubber, Timing belt
98-XL-031, ContiTech, CONTI® SYNCHROBELT Imperial Timing Belt
Imperial, Rubber, Timing belt, EAN code: 4051817008600
98-XL-037, ContiTech, CONTI® SYNCHROBELT Imperial Timing Belt
Imperial, Rubber, Timing belt, EAN code: 4051817008617
98-XL-037, Optibelt, ZR Imperial Timing Belt
Imperial, Rubber, Timing belt
700-H-100, ContiTech, CONTI® SYNCHROBELT Imperial Timing Belt
Imperial, Rubber, Timing belt, EAN code: 4051817003285
700-XH-300, Gates, PowerGrip® Imperial Timing Belt - 9257-52070
Imperial, Rubber, Timing belt, EAN code: 5412571226423
Common imperial pitches include
-
MXL
-
XL
-
L
-
H
-
XH
-
XXH
Each pitch is designed for specific torque and load capacities, making correct selection essential.
Key Benefits
- Positive drive with zero slippage
- Precise shaft synchronisation
- High efficiency power transmission
- Reduced maintenance compared to chain drives
- Smooth, low-noise operation
- Long service life
Imperial synchronous belts are widely used where consistent positioning and repeatability are critical.
Available Sizes & Specifications
When selecting an imperial timing belt, key factors include:
-
Pitch type (e.g., XL, L, H)
-
Belt length (in inches)
-
Belt width (in inches)
-
Tooth profile
-
Construction material (neoprene, polyurethane)
-
Tensile reinforcement type
If you have an existing belt code, it typically includes pitch and length information for easy identification.
Imperial Timing Belts FAQs
Are imperial and metric timing belts interchangeable?
No. Imperial belts use inch-based pitch measurements, while metric belts use millimetres (e.g., 5M, 8M, 14M). They are not interchangeable, even if they appear similar in size.
How do I identify my imperial timing belt size?
You will need to confirm:
-
Belt pitch (e.g., XL, L, H)
-
Belt length (in inches)
-
Belt width (in inches)
Most belts have a printed code that includes this information. If the marking is worn, measuring tooth pitch and belt length can help determine the correct replacement.
What causes imperial timing belts to fail?
Common causes of failure include:
-
Incorrect belt tension
-
Pulley misalignment
-
Overloading
-
Contamination from oil or debris
-
Mixing metric and imperial components
Routine inspection and proper installation significantly extend belt life.