935-5M-25, Optibelt, OMEGA Metric Timing Belt HTD
Metric, Rubber, Timing belt
950-5M-25, Protorque, HTD Metric Timing Belt
Metric, Rubber, Timing belt
PHG 896-8M-9, SKF, Metric Timing Belt HTD - PHG 896-8M-9
Metric, Rubber, Timing belt
896-S8M-30, ContiTech, CONTI® SYNCHROBELT Metric Timing Belt - HTD
Metric, Rubber, Timing belt, EAN code: 4051817032605
960-8M-30, Optibelt, OMEGA Metric Timing Belt HTD
Metric, Rubber, Timing belt
312-3M-15, ContiTech, CONTI® SYNCHROBELT Metric Timing Belt - HTD
Metric, Rubber, Timing belt, EAN code: 4051817013314
312-3MGT3-15, Gates, POWERGRIP® GT3 Metric Timing Belt
Metric, Rubber, Timing belt, EAN code: 5414465315268
3150-14M-40, Protorque, HTD Metric Timing Belt
Metric, Rubber, Timing belt
3150-14M-55, Protorque, HTD Metric Timing Belt
Metric, Rubber, Timing belt
318-3M-9, ContiTech, CONTI® SYNCHROBELT Metric Timing Belt - HTD
Metric, Rubber, Timing belt, EAN code: 4051817013338
1552-8M-25, ContiTech, CONTI SYNCHROBELT Timing Belt
Metric, Timing belt
158-2M-9-HP, Optibelt, OMEGA HP High Performance Timing Belt HTD
Metric, Rubber, Timing belt
158-2MGT3-3, Gates, POWERGRIP® GT3 Metric Timing Belt
Metric, Rubber, Timing belt, EAN code: 5414465982149
1595-5M-25, Protorque, HTD Metric Timing Belt
Metric, Rubber, Timing belt
350-5M-15, Gates, POWERGRIP® HTD Metric Timing Belt
Metric, Rubber, Timing belt, EAN code: 5412571278996
350-5M-9, ContiTech, CONTI® SYNCHROBELT Metric Timing Belt - HTD
Metric, Rubber, Timing belt, EAN code: 4051817015844
4326-14M-115, ContiTech, CONTI® SYNCHROBELT Metric Timing Belt - HTD
Metric, Rubber, Timing belt, EAN code: 4051817023856
4326-14M-30, ContiTech, CONTI® SYNCHROBELT Metric Timing Belt - HTD
Metric, Rubber, Timing belt
4326-14MGT4-85, Gates, POWERGRIP® GT4 Metric Timing Belt
Metric, Rubber, Timing belt, EAN code: 5400608209808
450-5M-25, ContiTech, CONTI® SYNCHROBELT Metric Timing Belt - HTD
Metric, Rubber, Timing belt, EAN code: 4051817016193
What Are Metric Timing Belts?
Metric timing belts (also known as metric synchronous belts) feature precision-moulded teeth that mesh perfectly with corresponding pulley grooves. Unlike V-belts or flat belts, timing belts eliminate slippage, ensuring exact rotational synchronisation between shafts.
They are commonly manufactured in metric pitches such as:
-
3M
-
5M
-
8M
-
14M
-
20M
These pitch designations refer to the distance (in millimetres) between belt teeth, allowing accurate specification for industrial machinery.
Need Help Selecting the Right Belt?
Choosing the correct timing belt ensures optimal performance and longevity. If you require help identifying pitch, length, or load capacity, our technical specialists are ready to assist.
Metric Timing Belts FAQs
What do 5M, 8M and 14M mean on a timing belt?
The “M” refers to metric pitch. For example:
-
5M = 5mm pitch
-
8M = 8mm pitch
-
14M = 14mm pitch
The pitch indicates the distance between belt teeth and must match the pulley exactly.
What is the difference between metric and imperial timing belts?
Metric timing belts use millimetre pitch measurements, while imperial belts use inch-based pitch measurements. They are not interchangeable, and mixing the two can cause premature wear or drive failure.
How do I identify the correct timing belt size?
You will need:
-
Tooth pitch (e.g., 8M)
-
Belt length (in mm)
-
Belt width (in mm)
-
Tooth profile (HTD, STD, etc.)
If the belt code is visible, it usually contains this information.