MB 8, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316570517996
MB 5, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571066462
KMT 6, SKF, Precision Lock nut
Nut, Steel, M 30x1.5, EAN code: 7316577291851
KM 22, SKF, Locknut
Nut, Steel, M 110x2, EAN code: 7316577011206
KM 7, SKF, Locknut
Nut, Steel, M 35x1.5, EAN code: 7316571353456
KM 21, SKF, Locknut
Nut, Steel, M 105x2, EAN code: 7316577011190
KM 26, SKF, Locknut
Nut, Steel, M 130x2, EAN code: 7316577011244
N 10, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571385495
MB 12, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577758538
AN 22, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660467
KM 16, SKF, Locknut
Nut, Steel, M 80x2, EAN code: 7316571770239
AN 26, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660481
MB 16, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571770222
KM 17, SKF, Locknut
Nut, Steel, M 85x2, EAN code: 7316571770208
W 11, SKF, Locking washer
Washer, Steel, EAN code: 7316571385563
MB 22, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011657
KM 3, SKF, Locknut
Nut, Steel, M 17x1, EAN code: 7316571249797
MB 15, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571770260
MB 4, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316570803693
KM 30, SKF, Locknut
Nut, Steel, M 150x2, EAN code: 7316577011282
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.