1-10 of 10 products
MB 44, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011787
Brand | SKF |
---|---|
Mfr Part No. | MB 44 |
HM 3044, SKF, HM lock nut with metric trapezoidal threads, locked on shaft by MS locking clip
Locknut, Steel, Tr 220x4, EAN code: 7316577010698
Brand | SKF |
---|---|
Mfr Part No. | HM 3044 |
HM 3044, FAG, Lock nut with locking clip and screw
Locknut, Steel, Tr220X4, EAN code: 4012801218399
Brand | FAG |
---|---|
Mfr Part No. | HM 3044 |
HM 3044, NKE, Lock nut with locking clip and screw
Locknut, Steel, Tr 220x4, EAN code: 9008745224287
Brand | NKE |
---|---|
Mfr Part No. | HM 3044 |
HM 3044, Timken, Lock nut with locking clip and screw
Locknut, Steel, Tr 220x4, EAN code: 0087796251168
Brand | Timken |
---|---|
Mfr Part No. | HM 3044 |
MB 44, FAG, Locking washer
Tab Washer, Steel, EAN code: 4012801224611
Brand | FAG |
---|---|
Mfr Part No. | MB 44 |
MB 44, NKE, Locking washer
Tab Washer, Steel, EAN code: 9008745737336
Brand | NKE |
---|---|
Mfr Part No. | MB 44 |
MB 44, RHP, Locking washer
Tab Washer, Steel, EAN code: 00747023116317
Brand | RHP |
---|---|
Mfr Part No. | MB 44 |
MB 44, Timken, Locking washer
Tab Washer, Steel, EAN code: 0087796213319
Brand | Timken |
---|---|
Mfr Part No. | MB 44 |
KMT 44, SKF, Precision Lock nut
Nut, Steel, Tr 220x4, EAN code: 7316570754438
Brand | SKF |
---|---|
Mfr Part No. | KMT 44 |
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.