1-15 of 15 products
KM 4, SKF, Locknut
Nut, Steel, M 20x1
Brand | SKF |
---|---|
Mfr Part No. | KM 4 |
MB 3, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316570545975
Brand | SKF |
---|---|
Mfr Part No. | MB 3 |
KM 4, Neutral, Locknut
Nut, Steel, M 20x1
Brand | Neutral |
---|---|
Mfr Part No. | KM 4 |
KM 4 Nyloc, Neutral, Locknut
Nut, Steel, M 20x1
Brand | Neutral |
---|---|
Mfr Part No. | KM 4 Nyloc |
KMK 4, SKF, Lock nut with integral locking screw
Nut, Steel, M 20x1, EAN code: 7316571483542
Brand | SKF |
---|---|
Mfr Part No. | KMK 4 |
MB 3, Neutral, Locking washer
Tab Washer, Steel
Brand | Neutral |
---|---|
Mfr Part No. | MB 3 |
AM17, INA, Precision locknuts AM, segments for clamping
Precision locknut, Steel, M17X1, EAN code: 4012802032123
Brand | INA |
---|---|
Mfr Part No. | AM17 |
KMFE 4, SKF, Lock nut with integral locking screw
Nut, Steel, M20x1, EAN code: 7316571584683
Brand | SKF |
---|---|
Mfr Part No. | KMFE 4 |
ZM20, INA, Precision locknut
Precision locknut, Steel, M20X1, EAN code: 4012802079326
Brand | INA |
---|---|
Mfr Part No. | ZM20 |
KM 4, FAG, Locknut
Nut, Steel, M20x1, EAN code: 4012801109512
Brand | FAG |
---|---|
Mfr Part No. | KM 4 |
KM 4, NKE, Locknut
Nut, Steel, M 20x1, EAN code: 9008745731761
Brand | NKE |
---|---|
Mfr Part No. | KM 4 |
KM 4, RHP, Locknut
Nut, Steel, M 20x1, EAN code: 00747023116393
Brand | RHP |
---|---|
Mfr Part No. | KM 4 |
KM 4, Timken, Locknut
Nut, Steel, M 20x1, EAN code: 0087796212770
Brand | Timken |
---|---|
Mfr Part No. | KM 4 |
MB 3, NKE, Locking washer
Tab Washer, Steel, EAN code: 9008745725142
Brand | NKE |
---|---|
Mfr Part No. | MB 3 |
MB 3, Timken, Locking washer
Tab Washer, Steel, EAN code: 0087796213098
Brand | Timken |
---|---|
Mfr Part No. | MB 3 |
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.