TAN21, Timken, Lock nut
Nut, Steel, EAN code: 0053893001470
KM 9, Neutral, Locknut
Nut, Steel, M 45x1.5
KMFE 14, SKF, Lock nut with integral locking screw
Nut, Steel, M70x2, EAN code: 7316571585345
AN 22, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660467
MB 11, Neutral, Locking washer
Tab Washer, Steel
HM 3048, SKF, HM lock nut with metric trapezoidal threads, locked on shaft by MS locking clip
Locknut, Steel, Tr 240x4, EAN code: 7316577010704
KMTA 8, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 40x1.5, EAN code: 7316577655226
KM 13, FAG, Locknut
Nut, Steel, M65x2, EAN code: 4012801052511
This item is not currently available from our stocks.
Despatch date information is on request.
W 24, SKF, Locking washer
Washer, Steel, EAN code: 7316576676185
This item is not currently available from our stocks.
Despatch date information is on request.
Z 205 F, SKF, Sealing washers, F design
Washer, Steel, EAN code: 7316571353616
This item is not currently available from our stocks.
Despatch date information is on request.
KMT 14, SKF, Precision Lock nut
Nut, Steel, M 70x2, EAN code: 7316577656513
KM 12, Neutral, Locknut
Nut, Steel, M 60x2
KM 12 Nyloc, Neutral, Locknut
Nut, Steel, M 60x2
KM 3, SKF, Locknut
Nut, Steel, M 17x1, EAN code: 7316571249797
KMK 9, SKF, Lock nut with integral locking screw
Nut, Steel, M 45x1.5, EAN code: 7316571106991
MB 18, Neutral, Locking washer
Tab Washer, Steel
MB 22, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011657
MB 38, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011770
MB 7, Neutral, Locking washer
Tab Washer, Steel
MB 8, Neutral, Locking washer
Tab Washer, Steel
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.