KMT 36, SKF, Precision Lock nut
Nut, Steel, M 180x3, EAN code: 7316577655165
MB 19, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011626
MB 21, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011640
Z 305, SKF, Sealing washer, standard design
Washer, Steel
KM 25, SKF, Locknut
Nut, Steel, M 125x2, EAN code: 7316577011237
KM 33, SKF, Locknut
Nut, Steel, M 165x3, EAN code: 7316577011312
KMT 40, SKF, Precision Lock nut
Nut, Steel, M 200x3, EAN code: 7316577655189
KMTA 12, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 60x1.5, EAN code: 7316577655264
TAN16, Timken, Lock nut
Nut, Steel, EAN code: 0053893001272
This item is not currently available from our stocks.
Despatch date information is on request.
W 30, SKF, Locking washer
Washer, Steel
This item is not currently available from our stocks.
Despatch date information is on request.
KM 16, Neutral, Locknut
Nut, Steel, M 80x2
KM 22, Neutral, Locknut
Nut, Steel, M 110x2
KMK 8, SKF, Lock nut with integral locking screw
Nut, Steel, M 40x1.5, EAN code: 7316570172515
KMK 9, SKF, Lock nut with integral locking screw
Nut, Steel, M 45x1.5, EAN code: 7316571106991
KML 30, SKF, Locknut
Nut, Steel, M 150x2, EAN code: 7316577055668
MB 10 A, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571158815
MB 44, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011787
MB 6, Neutral, Locking washer
Tab Washer, Steel
MB 7, Neutral, Locking washer
Tab Washer, Steel
W 14, SKF, Locking washer
Washer, Steel, EAN code: 7316571385594
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.