TAN19, Timken, Lock nut
Nut, Steel, EAN code: 0053893001371
This item is not currently available from our stocks.
Despatch date information is on request.
TW112, Timken, Locking washer
Washer, Steel, EAN code: 0053893822075
ZM25, INA, Precision locknut
Precision locknut, Steel, M25X1, 5, EAN code: 4012802079333
This item is not currently available from our stocks.
Despatch date information is on request.
AN 18, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660429
AN 28, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660498
KM 4, Neutral, Locknut
Nut, Steel, M 20x1
KM 40, Neutral, Locknut
Nut, Steel, M 200x3
MB 1, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316570872781
MB 15, Neutral, Locking washer
Tab Washer, Steel
MB 4, Neutral, Locking washer
Tab Washer, Steel
MB 6, Neutral, Locking washer
Tab Washer, Steel
N 07, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571280707
Z 206 F, SKF, Sealing washers, F design
Washer, Steel
Z 307, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316571351230
KMT 13, SKF, Precision Lock nut
Nut, Steel, M 65x2, EAN code: 7316577655035
MB 40, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577001399
W 19, SKF, Locking washer
Washer, Steel, EAN code: 7316576676147
KMT 20, SKF, Precision Lock nut
Nut, Steel, M 100x2, EAN code: 7316577655080
KMT 8, SKF, Precision Lock nut
Nut, Steel, M 40x1.5, EAN code: 7316577655011
KM 16 Nyloc, Neutral, Locknut
Nut, Steel, M 80x2
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.