KMTA 10, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 50x1.5, EAN code: 7316577655240
TAN130, Timken, Lock nut
Nut, Steel, EAN code: 0053893004136
TAN140, Timken, Lock nut
Nut, Steel, EAN code: 0053893004563
MB 18, Neutral, Locking washer
Tab Washer, Steel
KMF 5, SKF, Lock nut with integral locking screw
Nut, Steel, M 25x1.5, EAN code: 7316580969105
W 26, SKF, Locking washer
Washer, Steel, EAN code: 7316576676192
ZW 80X90, SKF, Spacing washer
Washer, Steel, EAN code: 7316571385631
This item is currently out of stock.
You may place your order now and we will dispatch it as soon as stock arrives.
KM 7, Neutral, Locknut
Nut, Steel, M 35x1.5
This item is currently out of stock.
You may place your order now and we will dispatch it as soon as stock arrives.
KMFE 22, SKF, Lock nut with integral locking screw
Nut, Steel, M110x2, EAN code: 7316571587844
This item is currently out of stock.
You may place your order now and we will dispatch it as soon as stock arrives.
TAN15, Timken, Lock nut
Nut, Steel, EAN code: 0053893001227
This item is currently out of stock.
You may place your order now and we will dispatch it as soon as stock arrives.
TN13, Timken, Lock nut
Nut, Steel
This item is currently out of stock.
You may place your order now and we will dispatch it as soon as stock arrives.
TW124, Timken, Locking washer
Washer, Steel, EAN code: 0053893815794
TW134, Timken, Locking washer
Washer, Steel, EAN code: 0053893822181
This item is currently out of stock.
You may place your order now and we will dispatch it as soon as stock arrives.
W 22, SKF, Locking washer
Washer, Steel, EAN code: 7316576676178
AN 22, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660467
MB 11, Neutral, Locking washer
Tab Washer, Steel
MB 12, Neutral, Locking washer
Tab Washer, Steel
MB 17, Neutral, Locking washer
Tab Washer, Steel
MB 27, Neutral, Locking washer
Tab Washer, Steel
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.