KM 2, Neutral, Locknut
Nut, Steel, M 15x1
KMFE 9, SKF, Lock nut with integral locking screw
Nut, Steel, M45x1.5, EAN code: 7316571585109
MB 2, Neutral, Locking washer
Tab Washer, Steel
MB 29, Neutral, Locking washer
Tab Washer, Steel
MB 9, Neutral, Locking washer
Tab Washer, Steel
Z 210, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316577300782
This item is not currently available from our stocks.
Despatch date information is on request.
KM 40, SKF, Locknut
Nut, Steel, M 200x3, EAN code: 7316577011350
KMFE 15, SKF, Lock nut with integral locking screw
Nut, Steel, M75x2, EAN code: 7316571585352
This item is not currently available from our stocks.
Despatch date information is on request.
MB 22, FAG, Locking washer
Tab Washer, Steel, EAN code: 4054369880342
This item is not currently available from our stocks.
Despatch date information is on request.
MS 3060, SKF, Locking clip
Securing plate, Steel, EAN code: 7316577011848
KM 0, Neutral, Locknut
Nut, Steel, M 10x0.75
KM 23, Neutral, Locknut
Nut, Steel, M 115x2
KM 36, Neutral, Locknut
Nut, Steel, M 180x3
KM 4 Nyloc, Neutral, Locknut
Nut, Steel, M 20x1
KMK 1, SKF, Lock nut with integral locking screw
Nut, Steel, M 12x1, EAN code: 7316571483511
KMK 17, SKF, Lock nut with integral locking screw
Nut, Steel, M 85x2, EAN code: 7316570228083
KMK 7, SKF, Lock nut with integral locking screw
Nut, Steel, M 35x1.5, EAN code: 7316570620351
KMT 15, SKF, Precision Lock nut
Nut, Steel, M 75x2, EAN code: 7316577655042
KMT 26, SKF, Precision Lock nut
Nut, Steel, M 130x2, EAN code: 7316577655110
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.