KMT 40, SKF, Precision Lock nut
Nut, Steel, M 200x3, EAN code: 7316577655189
KMTA 7, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 35x1.5, EAN code: 7316577655219
This item is not currently available from our stocks.
Despatch date information is on request.
TAN16, Timken, Lock nut
Nut, Steel, EAN code: 0053893001272
This item is not currently available from our stocks.
Despatch date information is on request.
TW140, Timken, Locking washer
Washer, Steel, EAN code: 0053893821344
KM 1, Neutral, Locknut
Nut, Steel, M 12x1
KM 16, Neutral, Locknut
Nut, Steel, M 80x2
KM 2, Neutral, Locknut
Nut, Steel, M 15x1
KM 25, Neutral, Locknut
Nut, Steel, M 125x2
KM 3 Nyloc, Neutral, Locknut
Nut, Steel, M 17x1
KMFE 14, SKF, Lock nut with integral locking screw
Nut, Steel, M70x2, EAN code: 7316571585345
KMK 10, SKF, Lock nut with integral locking screw
Nut, Steel, M 50x1.5, EAN code: 7316570965087
KMK 17, SKF, Lock nut with integral locking screw
Nut, Steel, M 85x2, EAN code: 7316570228083
KML 30, SKF, Locknut
Nut, Steel, M 150x2, EAN code: 7316577055668
MB 10 A, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571158815
MB 15, Neutral, Locking washer
Tab Washer, Steel
MB 17, Neutral, Locking washer
Tab Washer, Steel
MB 25, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011671
MB 7, Neutral, Locking washer
Tab Washer, Steel
MB 9, Neutral, Locking washer
Tab Washer, Steel
N 05, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571278735
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.