TN11, Timken, Lock nut
Nut, Steel, EAN code: 0053893000923
MB 14, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571773728
MB 19, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011626
MB 4, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316570803693
N 13, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571385488
KM 30, SKF, Locknut
Nut, Steel, M 150x2, EAN code: 7316577011282
W 12, SKF, Locking washer
Washer, Steel, EAN code: 7316571385570
KM 24, SKF, Locknut
Nut, Steel, M 120x2, EAN code: 7316577011220
MB 30, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011725
N 10, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571385495
KM 27, SKF, Locknut
Nut, Steel, M 135x2, EAN code: 7316577011251
TW111, Timken, Locking washer
Washer, Steel, EAN code: 0053893821917
KM 28, SKF, Locknut
Nut, Steel, M 140x2, EAN code: 7316577011268
KM 6, Neutral, Locknut
Nut, Steel, M 30x1.5
MB 28, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011701
KMT 24, SKF, Precision Lock nut
Nut, Steel, M 120x2, EAN code: 7316577655103
This item is currently out of stock.
You may place your order now and we will dispatch it as soon as stock arrives.
KM 1, Timken, Locknut
Nut, Steel, M 12x1, EAN code: 0087796212732
N 05, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571278735
W 06, SKF, Locking washer
Washer, Steel, EAN code: 7316571396620
AN 26, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660481
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.