KM 5, Neutral, Locknut
Nut, Steel, M 25x1.5
W 15, SKF, Locking washer
Washer, Steel, EAN code: 7316571385655
MB 56, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011794
KM 34, SKF, Locknut
Nut, Steel, M 170x3, EAN code: 7316577011329
TAN21, Timken, Lock nut
Nut, Steel, EAN code: 0053893001470
TN11, Timken, Lock nut
Nut, Steel, EAN code: 0053893000923
AN 22, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660467
MB 0, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316570189964
MB 11, Neutral, Locking washer
Tab Washer, Steel
KM 9, Neutral, Locknut
Nut, Steel, M 45x1.5
KMFE 14, SKF, Lock nut with integral locking screw
Nut, Steel, M70x2, EAN code: 7316571585345
HM 3048, SKF, HM lock nut with metric trapezoidal threads, locked on shaft by MS locking clip
Locknut, Steel, Tr 240x4, EAN code: 7316577010704
KMTA 8, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 40x1.5, EAN code: 7316577655226
KM 13, FAG, Locknut
Nut, Steel, M65x2, EAN code: 4012801052511
This item is not currently available from our stocks.
Despatch date information is on request.
W 24, SKF, Locking washer
Washer, Steel, EAN code: 7316576676185
This item is not currently available from our stocks.
Despatch date information is on request.
Z 205 F, SKF, Sealing washers, F design
Washer, Steel, EAN code: 7316571353616
This item is not currently available from our stocks.
Despatch date information is on request.
MB 18, Neutral, Locking washer
Tab Washer, Steel
MB 19, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011626
MB 7, Neutral, Locking washer
Tab Washer, Steel
MB 8, Neutral, Locking washer
Tab Washer, Steel
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.