MB 8, Neutral, Locking washer
Tab Washer, Steel
KMT 14, SKF, Precision Lock nut
Nut, Steel, M 70x2, EAN code: 7316577656513
KM 12, Neutral, Locknut
Nut, Steel, M 60x2
KM 12 Nyloc, Neutral, Locknut
Nut, Steel, M 60x2
KMK 9, SKF, Lock nut with integral locking screw
Nut, Steel, M 45x1.5, EAN code: 7316571106991
W 06, SKF, Locking washer
Washer, Steel, EAN code: 7316571396620
W 20, SKF, Locking washer
Washer, Steel, EAN code: 7316576676154
MB 36, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011763
KM 36, SKF, Locknut
Nut, Steel, M 180x3, EAN code: 7316577011336
TN07, Timken, Lock nut
Nut, Steel
This item is not currently available from our stocks.
Despatch date information is on request.
MB 1, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316570872781
MB 10, Neutral, Locking washer
Tab Washer, Steel
MB 8 A, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316572309988
KMT 4, SKF, Precision Lock nut
Nut, Steel, M 20x1, EAN code: 7316577662736
KM 15, Neutral, Locknut
Nut, Steel, M 75x2
KM 18, Neutral, Locknut
Nut, Steel, M 90x2
KM 20, Neutral, Locknut
Nut, Steel, M 100x2
KM 24, Neutral, Locknut
Nut, Steel, M 120x2
MB 40, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577001399
KMT 12, SKF, Precision Lock nut
Nut, Steel, M 60x2, EAN code: 7316577294982
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.