KM 20, SKF, Locknut
Nut, Steel, M 100x2, EAN code: 7316577011183
KM 5, SKF, Locknut
Nut, Steel, M 25x1.5, EAN code: 7316577758880
MB 4, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316570803693
KM 12, SKF, Locknut
Nut, Steel, M 60x2
KMK 20, SKF, Lock nut with integral locking screw
Nut, Steel, M 100x2, EAN code: 7316570447637
This item is not currently available from our stocks.
Despatch date information is on request.
KM 32, Neutral, Locknut
Nut, Steel, M 160x3
MB 5, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571066462
W 24, SKF, Locking washer
Washer, Steel, EAN code: 7316576676185
MB 32, Neutral, Locking washer
Tab Washer, Steel
KM 2, SKF, Locknut
Nut, Steel, M 15x1, EAN code: 7316577754301
MB 13, SKF, Locking washer
Tab Washer, Steel
KMK 8, SKF, Lock nut with integral locking screw
Nut, Steel, M 40x1.5, EAN code: 7316570172515
This item is not currently available from our stocks.
Despatch date information is on request.
AN 24, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660474
N 12, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571280721
N 09, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571385501
MB 11, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316570627305
MB 12, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577758538
KM 3, SKF, Locknut
Nut, Steel, M 17x1, EAN code: 7316571249797
KMK 11, SKF, Lock nut with integral locking screw
Nut, Steel, M 55x2, EAN code: 7316577711755
This item is not currently available from our stocks.
Despatch date information is on request.
MB 10, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577757449
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.