KM 20, SKF, Locknut
Nut, Steel, M 100x2, EAN code: 7316577011183
KM 7, SKF, Locknut
Nut, Steel, M 35x1.5, EAN code: 7316571353456
KM 5, SKF, Locknut
Nut, Steel, M 25x1.5, EAN code: 7316577758880
W 24, SKF, Locking washer
Washer, Steel, EAN code: 7316576676185
MB 12, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577758538
MB 4, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316570803693
N 07, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571280707
KM 2, SKF, Locknut
Nut, Steel, M 15x1, EAN code: 7316577754301
AN 24, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660474
MB 9, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577758316
AN 30, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660504
This item is not currently available from our stocks.
Despatch date information is on request.
W 30, SKF, Locking washer
Washer, Steel
This item is not currently available from our stocks.
Despatch date information is on request.
N 09, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571385501
KMTA 18, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 90x2, EAN code: 7316577655325
This item is not currently available from our stocks.
Despatch date information is on request.
MB 11, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316570627305
KM 3, SKF, Locknut
Nut, Steel, M 17x1, EAN code: 7316571249797
AN 16, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571353487
KM 33, SKF, Locknut
Nut, Steel, M 165x3, EAN code: 7316577011312
MB 10, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577757449
MB 20, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011633
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.