KMFE 4, SKF, Lock nut with integral locking screw
Nut, Steel, M20x1, EAN code: 7316571584683
KMT 14, SKF, Precision Lock nut
Nut, Steel, M 70x2, EAN code: 7316577656513
W 18, SKF, Locking washer
Washer, Steel, EAN code: 7316576676130
KMF 9, SKF, Lock nut with integral locking screw
Nut, Steel, M 40x1.5
KMFE 20, SKF, Lock nut with integral locking screw
Nut, Steel, M100x2, EAN code: 7316571587820
This item is not currently available from our stocks.
Despatch date information is on request.
KMFE 22, SKF, Lock nut with integral locking screw
Nut, Steel, M110x2, EAN code: 7316571587844
This item is not currently available from our stocks.
Despatch date information is on request.
KML 34, NKE, Locknut
Nut, Steel, M 170x3, EAN code: 9008745233401
KMT 15, NKE, Precision Lock nut
Nut, Steel, M 75x2, EAN code: 9008745731976
KMT 19, SKF, Precision Lock nut
Nut, Steel, M 95x2, EAN code: 7316577291882
This item is not currently available from our stocks.
Despatch date information is on request.
TW134, Timken, Locking washer
Washer, Steel, EAN code: 0053893822181
TW140, Timken, Locking washer
Washer, Steel, EAN code: 0053893821344
TAN128, Timken, Lock nut
Nut, Steel, EAN code: 0053893004075
MB 0, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316570189964
MB 12, Neutral, Locking washer
Tab Washer, Steel
MB 13, Neutral, Locking washer
Tab Washer, Steel
MB 14, Neutral, Locking washer
Tab Washer, Steel
MB 14, Timken, Locking washer
Tab Washer, Steel, EAN code: 0013992166968
MB 29, Neutral, Locking washer
Tab Washer, Steel
MB 33, Neutral, Locking washer
Tab Washer, Steel
MB 36, Neutral, Locking washer
Tab Washer, Steel
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.